Hello Russ, You have to get CSP FDSI driver, to communicate to PLC5 and SLC505, I recently used it with PLC5 with FBM232 Best Regards ________________________________ De: Russ Kaiser <russ@xxxxxxxxxxxxxxxxxx> Para: foxboro@xxxxxxxxxxxxx Enviado: jue, noviembre 11, 2010 2:37:05 PM Asunto: [foxboro] SLC505 direct to FBM233? Hello list, I am currently messaging data from an SLC505 to one of my ControlLogix PLCs to then use my FDSI to get the data to the Foxboro DCS. Where there is a will there is a way, as they sometimes say. I have pulled the FDSI driver documentation and it doesn't look like I configure the SLC to talk directly to the FDSI, but I thought I would ask the list to see if my assumptions were correct. Can it be done? Russ _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave