Re: [foxboro] SLC505 direct to FBM233?
- From: "Johnson, Alex P (IOM)" <Alex.Johnson@xxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 11 Nov 2010 15:34:41 -0600
You certainly didn't ruffle my feathers. Sorry if my tone made it sound that
way.
The PER mechanism on the GCS website (http://support.ips.invensys.com) is the
best way to bring those suggestions forward. I know that they are reviewed and
there is a budget each year for PERs. I also know that there are improvements
to the FDSI software planned so PERs are really appropriate.
As for the current software, drop a line to iasdi@xxxxxxxxxxxx and get the
manuals and ask about your problem. You never know what might happen.
Regards,
Alex Johnson
Invensys Operations Management
10900 Equity Drive
Houston, TX 77041
+1 713 329 8472 (desk)
+1 713 329 1600 (operator)
+1 713 329 1944 (SSC Fax)
+1 713 329 1700 (Central Fax)
alex.johnson@xxxxxxxxxxxx (current)
alex.johnson@xxxxxxxxxxxxxxxx (good until September 2010)
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Russ Kaiser
Sent: Thursday, November 11, 2010 3:03 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] SLC505 direct to FBM233?
Alex,
I'm sorry if I ruffled any Invensys feathers and maybe I didn't' since
emails don't transmit expression. It was not my intention, I assure you.
The throughput of the FBM 232/233 is amazing compared to the old INT30s,
multiple driver capability or rewriting the EthernetIP driver to offer a SLC
choice in the DVOPT would be a welcome addition to Foxboro's arsenal.
Russ
>-----Original Message-----
>From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
>Behalf Of Johnson, Alex P (IOM)
>Sent: Thursday, November 11, 2010 3:30 PM
>To: foxboro@xxxxxxxxxxxxx
>Subject: Re: [foxboro] SLC505 direct to FBM233?
>
>Russ,
>
>Re: CSP FDSI driver documentation
>You can drop a line to the "IOM I/A Series Device Integration" group at
>iasdi@xxxxxxxxxxxx and ask them for information on the drivers including
>user manuals.
>
>Re: adding another FBM
>At one time, the intent was to allow support of multiple drivers supporting
>different protocols in the same FBM, I don't know if it was implemented,
>but you can always ask.
>
>Re: one FBM 233 can talk to a couple dozen CLX processors, but it can't
>talk
>to 1 CLX and 1 SLC
>It all boils down to the physical layer and the languages that the stations
>talk.
>
>If the CLX and SLC have a common tongue, one FDSI might suffice, if not,
>you need more than one.
>
>
>Regards,
>
>Alex Johnson
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
