Re: [foxboro] SLC505 direct to FBM233?
- From: "Russ Kaiser" <russ@xxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 11 Nov 2010 15:06:33 -0500
Thanks Tadeo,
I must have old edoc, I can't find a thing on this driver. Unfortunately,
that solution would mean adding another FBM. I don't think I want to cut
out the middleman that badly.
So one FBM 233 can talk to a couple dozen CLX processors, but it can't talk
to 1 CLX and 1 SLC.
Russ
>-----Original Message-----
>From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
>Behalf Of Tadeo Armenta
>Sent: Thursday, November 11, 2010 2:50 PM
>To: foxboro@xxxxxxxxxxxxx
>Subject: Re: [foxboro] SLC505 direct to FBM233?
>
>Hello Russ,
>You have to get CSP FDSI driver, to communicate to PLC5 and SLC505, I
>recently
>used it with PLC5 with FBM232
>
>Best Regards
>
>
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
