Hello list, I am currently messaging data from an SLC505 to one of my ControlLogix PLCs to then use my FDSI to get the data to the Foxboro DCS. Where there is a will there is a way, as they sometimes say. I have pulled the FDSI driver documentation and it doesn't look like I configure the SLC to talk directly to the FDSI, but I thought I would ask the list to see if my assumptions were correct. Can it be done? Russ _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave