Re: [foxboro] AIM*Historian connection on Windows
- From: "Michael Kessler" <mkessler@xxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 5 Nov 2004 10:27:17 -0500
I have been using this for over two years to get legacy historian data. I'm
grabbing about 2800 points (24 hours worth of data) out of the historian per
day, every day. Now using Aim vs 3.1.2. Very few problems. I do find the
ODBC interface slow, it takes almost two hours to grab all my data.
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx
> [mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of Loiselle, Marc-Andre
> Sent: Thursday, November 04, 2004 9:14 AM
> To: 'foxboro@xxxxxxxxxxxxx'
> Subject: Re: [foxboro] AIM*Historian connection on Windows
>
>
> There is a good example of usage of the AIM* ODBC driver with Visual Basic
> and the DAO library (that works) in AIM*DataLink User's Guide (B0193YJ rev
> B), section 10. As mentioned previously, the "Events" database should be
> used to get alarms.
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
