[duxuser] Re: Braille Embossers
- From: "Jillian Queen" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "jhqbraille" for DMARC)
- To: duxuser@xxxxxxxxxxxxx
- Date: Sun, 13 Nov 2016 17:08:12 -0500
Same here.
-----Original Message-----
From: Fina B Currey <peterrubin1950@xxxxxxxxx>
To: duxuser <duxuser@xxxxxxxxxxxxx>
Sent: Sun, Nov 13, 2016 2:53 pm
Subject: [duxuser] Re: Braille Embossers
Hello,
No, Freedom Scientific will not service the VersaPoint. I have one that I sent
up there after they told me they wuld service it and then when they got it they
called me and told me no, that they won't service or repair VersaPoint
embossers anymore so they sent it backto me.
Hope this helps.
Fina Curey
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Jhqbraille (Redacted sender "jhqbraille" for DMARC)
Sent: Wednesday, October 26, 2016 7:53 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Braille Embossers
Still confused about who owns which companies. I know TSI collapsed, but then
came back for a while, before it was finally done.
Enabling Technologies took over the VersaPoint manufacture and sales in the
first interim, but they wouldn't service mine when I called them.
So, I'd be interested in finding out if Freedom Scientific would service the
VersaPoint, too. If I find out, I'll post the information. Jill
-----Original Message-----
From: Milton Ota <mota1252@xxxxxxxxxxxx>
To: dmarc-noreply <dmarc-noreply@xxxxxxxxxxxxx>
Cc: duxuser <duxuser@xxxxxxxxxxxxx>
Sent: Wed, Oct 26, 2016 8:31 pm
Subject: [duxuser] Re: Braille Embossers
Original message: > I've had phenomenal luck with my Telesensory VersaPoint for
over 30 > years. It was a free replacement for a pretty terrible, short-lived,
embosser called the MBoss. Guess they were feeling guilty. > Except for
replacing the fuse, I hadn't had any trouble with it at all > until about 8-10
years ago with it missing dots. I thought, awww... > It's not like it owed me
anything at this point. I figured it was a > solenoid or a wire to it. Of
course, TSI, was long gone, and no one > would service it. > My buddy at TSI
(retired 10 years) suggested I take it apart. With him > on the phone, holding
my breath the whole time, I did. It wasn't a > solenoid at all. It was under
the solenoid panel, jammed with a spec of > rock-hard paper! Tweezers, a can of
air, an hour, and two pounds of > perspiration later, and everything worked
perfectly again. Go figure. > If you do choose to get a used VersaPoint, make
sure it's from TSI. It > will be on the cover. It's important to have the cover
because it has a > powerful magnet in it that triggers the embosser. It's
really good > quality braille. > Jill > -----Original Message----- > From:
Diane Scalzi <dscalzi@xxxxxxxxxxx> > To: duxuser <duxuser@xxxxxxxxxxxxx> >
Sent: Wed, Oct 26, 2016 7:40 pm > Subject: [duxuser] Re: Braille Embossers > Hi
Jerry, > I was afraid of that. Thanks. > Diane > From:
duxuser-bounce@xxxxxxxxxxxxx > [
mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf ;
Of jyandt.martin@xxxxxxxxxxx > Sent: Wednesday, October 26, 2016 5:31 PM > To:
duxuser@xxxxxxxxxxxxx > Subject: [duxuser] Re: Braille Embossers > Diane: > I
have a Juliet Pro 60 myself. I have had it for about three years and > have not
had any problems with it. But as soon as funds become > available, I am going
to have it in the shop for cleaning. I cannot > elaborate on the other
embossers, but as far as finding another > embosser that is less expensive,
good luck. As we all know, when you > put “adaptive” before any item, the price
goes up exponentially. > Jerry > From: Diane Scalzi > Sent: Wednesday, October
26, 2016 4:09 PM > To: duxuser@xxxxxxxxxxxxx > Subject: [duxuser] Braille
Embossers > Hi Everyone, > Once again some of the dots on my Juliet Pro 60 are
no longer printing. > If I decide to return it to Enabling Technologies for
repair, this will > be the third time in around 6 years. It has been less than
a year since > I received it back from the shop last time. I'm seriously
considering > not bothering to return it. Does anyone have any experience with
the > Juliet 120 wireless interpoint embosser? Also, can anyone recommend an >
interpoint embosser that might be less expensive and more reliable? All > help
appreciated. Thanks. > Diane Yes, the VersaPoint was made and sold by
Telesensory but when Freedomscientific acquired Telesensory, Freedom Scientific
was selling and repairing the VersaPoint embossers. You might want to see if
they still are servicing them, if not make a deal if you are in the market and
sell it and buy a more current model of an embosser. Freedom Scientific's
number is 1-800-443--4443.
N���,j�����+-v�n��ڵ��zX���+�:.�˛���m��֛����,j���n�˛���m欶����r�hv�n���z�����y�b��(�(�f�j[(���r��z�칻�&�jwlz��q�b�y�u�v�az�.n�+��b�z)�*'����ȭ�x0��y�b��(��zX���܆+ފƥ��hq�^v�^���Ż��,������ע�0v�[�����^��(�
Other related posts:
