[ddots-l] Re: more soft synth questions
- From: "neville" <neville@xxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 19 Jan 2007 09:39:43 -0500
What are the benifits of inserting as a multy output soft synth. Please excuse
my ignorance.
----- Original Message -----
From: Phil Muir
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, January 19, 2007 3:43 AM
Subject: [ddots-l] Re: more soft synth questions
Also, if you insert a softsynthe across the track bin, rather than in the
sintherack or, through the insert menu then, you won't be able to insert it as
a multy output softsynthe.
Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
----- Original Message -----
From: Luis Elorza
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, January 19, 2007 6:05 AM
Subject: [ddots-l] Re: more soft synth questions
Omar:
my experience has been that inserting the soft synth in the synth rack or
with insert will not allow the parameters to be edited in the inspector. when
you insert it to de fx bin then you can open the audio track's inspector and by
hitting shift right arrow you find the effects view then you do a shift down
arrow and you can change three fx modes for viewing. one of them displays 4
parameters that you can edit or reassign to edit different parameters and all
the changes will all be recalled when you load this project.
but in the case of inserting the soft synth in the effects bin, i have
encountered problems when freezing the track.
to insert the soft synth i do it a little differently,. i open the insert
from the menu bar, then select audio track, then go to the fx bin and hit
application key and select soft synth.
The second answer is that if your soft synth recognizes patch change then
or if it is multi-timbral then you need to assign the midi channel.
I hope my explanation was clear.
Luis
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Thursday, January 18, 2007 6:50 PM
Subject: [ddots-l] more soft synth questions
Hello:
I have two questions about soft synth insertions.
1. What is the difference between inserting a soft synth by going to alt
I, then inserting it that way, or if you rout jaws to pc on a midi track, then
insert an audio track, and then insert the soft synth as an effect in the
effects bin of the audio track?
2. When I insert a soft synth, do I need to go to the midi track assigned
to the soft synth and assign it to a midi channel?
Thanks.
Omar Binno
Other related posts:
