[ddots-l] Re: more soft synth questions
- From: "Luis Elorza" <luiselorza@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 20 Jan 2007 22:51:26 -0800
i have never used a soft synth with multiple outputs but the way to do it is by
inserting it to the synth rack by opening the insert from the menu bar, then
selecting soft synth, then from the dialog check the box that says create audio
track for every output. then you will have all of the synths outputs routed to
separate audio tracks. but then comes the thing where i don't know and is how
to assign midi channels to those outputs.
but i haven't tried to find out because i always keep it together on the same
output and when i am ready to mix, then i do a bounce to track for every
midi channel i used thus converting every midi track to an audio track for
processing with e q ,effects or compression.
please excuse my english is not too good.-----
Original
Message -----
From: neville
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, January 20, 2007 3:35 PM
Subject: [ddots-l] Re: more soft synth questions
How do you do that.I'm only able to have one output at a time.
----- Original Message -----
From: Luis Elorza
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, January 19, 2007 6:17 PM
Subject: [ddots-l] Re: more soft synth questions
When you have multiple outputs you can have different sounds routed to
them, that way you can treat the audio track of every output with different eq,
or effects.
Luis
----- Original Message -----
From: neville
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, January 19, 2007 6:39 AM
Subject: [ddots-l] Re: more soft synth questions
What are the benifits of inserting as a multy output soft synth. Please
excuse my ignorance.
----- Original Message -----
From: Phil Muir
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, January 19, 2007 3:43 AM
Subject: [ddots-l] Re: more soft synth questions
Also, if you insert a softsynthe across the track bin, rather than in
the sintherack or, through the insert menu then, you won't be able to insert it
as a multy output softsynthe.
Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
----- Original Message -----
From: Luis Elorza
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, January 19, 2007 6:05 AM
Subject: [ddots-l] Re: more soft synth questions
Omar:
my experience has been that inserting the soft synth in the synth
rack or with insert will not allow the parameters to be edited in the
inspector. when you insert it to de fx bin then you can open the audio track's
inspector and by hitting shift right arrow you find the effects view then you
do a shift down arrow and you can change three fx modes for viewing. one of
them displays 4 parameters that you can edit or reassign to edit different
parameters and all the changes will all be recalled when you load this project.
but in the case of inserting the soft synth in the effects bin, i
have encountered problems when freezing the track.
to insert the soft synth i do it a little differently,. i open the
insert from the menu bar, then select audio track, then go to the fx bin and
hit application key and select soft synth.
The second answer is that if your soft synth recognizes patch change
then or if it is multi-timbral then you need to assign the midi channel.
I hope my explanation was clear.
Luis
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Thursday, January 18, 2007 6:50 PM
Subject: [ddots-l] more soft synth questions
Hello:
I have two questions about soft synth insertions.
1. What is the difference between inserting a soft synth by going
to alt I, then inserting it that way, or if you rout jaws to pc on a midi
track, then insert an audio track, and then insert the soft synth as an effect
in the effects bin of the audio track?
2. When I insert a soft synth, do I need to go to the midi track
assigned to the soft synth and assign it to a midi channel?
Thanks.
Omar Binno
Other related posts:
