[ddots-l] Re: more soft synth questions
- From: "Luis Elorza" <luiselorza@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 21 Jan 2007 12:04:44 -0800
is there an easier way?
by the way my name is L.U.I.S.
----- Original Message -----
From: Mike Christer
To: ddots-l@xxxxxxxxxxxxx
Sent: Sunday, January 21, 2007 10:35 AM
Subject: [ddots-l] Re: more soft synth questions
Hey Louisa!
Is that the way you always convert your midi trax to audio ones?
Just wondered
Mike
----- Original Message -----
From: Luis Elorza
To: ddots-l@xxxxxxxxxxxxx
Sent: Sunday, January 21, 2007 6:51 AM
Subject: [ddots-l] Re: more soft synth questions
i have never used a soft synth with multiple outputs but the way to do it
is by inserting it to the synth rack by opening the insert from the menu bar,
then selecting soft synth, then from the dialog check the box that says create
audio track for every output. then you will have all of the synths outputs
routed to separate audio tracks. but then comes the thing where i don't know
and is how to assign midi channels to those outputs.
but i haven't tried to find out because i always keep it together on the
same output and when i am ready to mix, then i do a bounce to track for
every midi channel i used thus converting every midi track to an audio track
for processing with e q ,effects or compression.
please excuse my english is not too good.-----
Original
Message -----
From: neville
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, January 20, 2007 3:35 PM
Subject: [ddots-l] Re: more soft synth questions
How do you do that.I'm only able to have one output at a time.
----- Original Message -----
From: Luis Elorza
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, January 19, 2007 6:17 PM
Subject: [ddots-l] Re: more soft synth questions
When you have multiple outputs you can have different sounds routed to
them, that way you can treat the audio track of every output with different eq,
or effects.
Luis
----- Original Message -----
From: neville
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, January 19, 2007 6:39 AM
Subject: [ddots-l] Re: more soft synth questions
What are the benifits of inserting as a multy output soft synth.
Please excuse my ignorance.
----- Original Message -----
From: Phil Muir
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, January 19, 2007 3:43 AM
Subject: [ddots-l] Re: more soft synth questions
Also, if you insert a softsynthe across the track bin, rather than
in the sintherack or, through the insert menu then, you won't be able to insert
it as a multy output softsynthe.
Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
----- Original Message -----
From: Luis Elorza
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, January 19, 2007 6:05 AM
Subject: [ddots-l] Re: more soft synth questions
Omar:
my experience has been that inserting the soft synth in the synth
rack or with insert will not allow the parameters to be edited in the
inspector. when you insert it to de fx bin then you can open the audio track's
inspector and by hitting shift right arrow you find the effects view then you
do a shift down arrow and you can change three fx modes for viewing. one of
them displays 4 parameters that you can edit or reassign to edit different
parameters and all the changes will all be recalled when you load this project.
but in the case of inserting the soft synth in the effects bin, i
have encountered problems when freezing the track.
to insert the soft synth i do it a little differently,. i open
the insert from the menu bar, then select audio track, then go to the fx bin
and hit application key and select soft synth.
The second answer is that if your soft synth recognizes patch
change then or if it is multi-timbral then you need to assign the midi channel.
I hope my explanation was clear.
Luis
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Thursday, January 18, 2007 6:50 PM
Subject: [ddots-l] more soft synth questions
Hello:
I have two questions about soft synth insertions.
1. What is the difference between inserting a soft synth by
going to alt I, then inserting it that way, or if you rout jaws to pc on a midi
track, then insert an audio track, and then insert the soft synth as an effect
in the effects bin of the audio track?
2. When I insert a soft synth, do I need to go to the midi
track assigned to the soft synth and assign it to a midi channel?
Thanks.
Omar Binno
----------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.410 / Virus Database: 268.17.3/642 - Release Date: 20/01/2007
Other related posts:
