[ddots-l] Re: advice needed.
- From: Kevin Gibbs <kevjazz@xxxxxx>
- To: "ddots-l@xxxxxxxxxxxxx" <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 30 Apr 2012 09:57:21 -0500
Sean,
I had no idea you could scrub that way. I'll have to try it. I still prefer
using my Tranzport.
Jack,
If you can use a control surface, I think you'll probably get more precise
results. Keep us posted.
K
Sent from my iPhone
On Apr 30, 2012, at 7:30 AM, "Sean A. Cummins" <seanacummins@xxxxxxxxx> wrote:
> Jack,
>
> You don't need to go into the clips pane any longer to scrub.
>
> Before I give you the keystrokes, always, and I said always, do a quick save
> of your work, (control plus S), to insure you can return to the point in
> which you started scrubbing. My machine will sometimes crash Sonar when
> using these keystrokes. However, they work really well, and are a real life
> saver when you just need to quickly scrub.
>
> Here goes...
>
> From the track view, just simply press (Alt plus 5) on the numeric keypad and
> continue to hold the alt key. Now while still holding the alt key, 1, 3, are
> small movements. 4, and 6, are medium movements. Then 7, and 9, are the
> large movements of the scrub pointer. Once you let go of the Alt key, you
> are now ready to set your from, or through points using the F9, and F10.
>
> Voila, that's all! You are scrubbing in the track view.
>
> Sean A.
>
>
>
> ----- Original Message -----
> From: Jack Conti
> To: dancing dots
> Sent: Monday, April 30, 2012 3:33 AM
> Subject: [ddots-l] advice needed.
>
> Hey folks, just wondering?
>
> not necessarily looking for the easy way out, but is being able to
> scrub in the clips payne an absolute necessity? can we get by in the
> track view?
>
> i do have a controll surface and is this the better option?
>
> i am finding chapters 38 and 39 tough to get though and understand in
> the ct manual but will do so if necessary. thinks in advance.
> Jack.
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
Other related posts:
