[ddots-l] Re: advice needed.
- From: "Sean A. Cummins" <seanacummins@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 30 Apr 2012 05:30:04 -0700
Jack,
You don't need to go into the clips pane any longer to scrub.
Before I give you the keystrokes, always, and I said always, do a quick save of
your work, (control plus S), to insure you can return to the point in which you
started scrubbing. My machine will sometimes crash Sonar when using these
keystrokes. However, they work really well, and are a real life saver when you
just need to quickly scrub.
Here goes...
From the track view, just simply press (Alt plus 5) on the numeric keypad and
continue to hold the alt key. Now while still holding the alt key, 1, 3, are
small movements. 4, and 6, are medium movements. Then 7, and 9, are the large
movements of the scrub pointer. Once you let go of the Alt key, you are now
ready to set your from, or through points using the F9, and F10.
Voila, that's all! You are scrubbing in the track view.
Sean A.
----- Original Message -----
From: Jack Conti
To: dancing dots
Sent: Monday, April 30, 2012 3:33 AM
Subject: [ddots-l] advice needed.
Hey folks, just wondering?
not necessarily looking for the easy way out, but is being able to
scrub in the clips payne an absolute necessity? can we get by in the
track view?
i do have a controll surface and is this the better option?
i am finding chapters 38 and 39 tough to get though and understand in
the ct manual but will do so if necessary. thinks in advance.
Jack.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
