Hi Kylee,
Hope some of this helps
Thanks, Jim. Is there anything I need to get someone to do to configure it
better? When I got the thing, I just installed the software and plugged in
the USB. It's seemed to work well enough for SoundForge (though
occasionally it will set itself to 0 volume and I have to find someone to
set it back); and I don't know whether it's going to be the most suitable
for Sonar here at home, as I think I'll need a mixer of some sort, along
with a cheaper sound card for Jaws, midi interface and some kind of keyboard
(did I leave anything out?).
Any help appreciated.
Cheers
Kylee
----- Original Message ----- From: "Jim" <jimmcauslan@xxxxxxxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, May 22, 2006 5:46 AM
Subject: [ddots-l] Re: What's this called, and where do I find it?
withHi Kylee,
I have had a M-audio fw 44-10 for the past two years and its a good card. Like yourself I find the M-audio control panel completely inaccessiblebutjaws but once I got it set up with some sighted help, I've had no need to change it. I believe there are software and firmware updtates to be hadI'll do that when I need to. However, I'm told that ederol sound cardsaremuch more accessible.seems
Jim McAuslan from sunny Findhorn
----- Original Message ----- From: "Kylee Maloney" <kylee@xxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, May 21, 2006 8:02 AM
Subject: [ddots-l] Re: What's this called, and where do I find it?
> Hi, all > > I'm new round here, but I must admit I find my MAudio card just about > impossible to configure. I've got a USB Omnistudio and its software> completely unreachable to me, not to mention inaccessible. When I trytoplease?> go > in there, JFW tells me nothing at all. How do you all manage it,>serfice
> Cheers
>
> Kylee
> ----- Original Message ----- > From: "Mike C" <m_dsmusic@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Monday, May 22, 2006 12:45 AM
> Subject: [ddots-l] Re: What's this called, and where do I find it?
>
>
>> Hi Raymond as I stated in an earlier poste, you can still use your
>> soundblaster card to run Jaws, and get yourself a higher end card for
>> your
>> audio needs. There's no need to take out the soundblaster at all.
>> Infact
>> if you have the bucks go for a firewire card from M-audio. there's >> the
>> Firewire 44-10, Firewire 1814, or the new Project Mix, which is a>> controler. I've got one, and I couldn't have picked a better card.Thefrom>> audio quality is fantastic, and my clients have been so impressed with >> its >> results. >> >> So if you've got the extra cash, really consider the firewire series>> M-audio, you wouldn't even need to open up your PC at all, simply plugblaster
>> the
>> card in to your firewire port of your Pc, and you'll be set. Of >> course
>> there's always configuring to do, but that's with everything.
>> ----- Original Message ----- >> From: "Raymond" <musicalman@xxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Saturday, May 20, 2006 6:20 PM
>> Subject: [ddots-l] Re: What's this called, and where do I find it?
>>
>>
>> > Are you sure about that? I thought the Sound Blaster Live was one of
>> > the
>> > best sound cards out there, and if I am going to take that one out,
>> > what
>> > would be a good replacement?
>> > Raymond
>> >
>> > ----- Original Message ----- >> > From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
>> > To: <ddots-l@xxxxxxxxxxxxx>
>> > Sent: Saturday, May 20, 2006 1:55 PM
>> > Subject: [ddots-l] Re: What's this called, and where do I find it?
>> >
>> >
>> >> Raymond.
>> >> Take the sb live card and burn it! You need a better sound card to
>> >> use
>> >> any soft synths.
>> >> Gord
>> >> ----- Original Message ----- >> >> From: "Raymond" <musicalman@xxxxxxxxxx>
>> >> To: <ddots-l@xxxxxxxxxxxxx>
>> >> Sent: Saturday, May 20, 2006 1:25 PM
>> >> Subject: [ddots-l] Re: What's this called, and where do I find it?
>> >>
>> >>
>> >>> I'm using the Cakewalk TTS1 as the synth and I think a Soundwhere>> >>> live as my sound card. I sent this problem before, and I got a >> >>> suggestion about the latancy or something like that. No matter>> >>> I19/05/2006
>> >>> set it, I get little to no difference. If I'm practicing a track
> before
>> >>> I record, it works fine, it's just when recording.
>> >>> Raymond
>> >>>
>> >>> ----- Original Message ----- >> >>> From: "Chris Smart" <chris_s@xxxxxxxxxxxx>
>> >>> To: <ddots-l@xxxxxxxxxxxxx>
>> >>> Sent: Wednesday, May 17, 2006 7:03 PM
>> >>> Subject: [ddots-l] Re: What's this called, and where do I find it?
>> >>>
>> >>>
>> >>>> At 05:05 PM 5/17/2006, you wrote:
>> >>>>>I have that same problem in Sonar. Every time I press a note when
>> >>>>>recording, the keyboard is so sluggish that notes go way off-beet
>> >>>>>and
>> >>>>>it's sluggish.
>> >>>>
>> >>>> What software synth and soundcard are you using?
>> >>>>
>> >>>> ** To leave the list, click on the immediately-following link:-
>> >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >>>> ** If this link doesn't work then send a message to:
>> >>>> ** ddots-l-request@xxxxxxxxxxxxx
>> >>>> ** and in the Subject line type
>> >>>> ** unsubscribe
>> >>>> ** For other list commands such as vacation mode, click on the
>> >>>> ** immediately-following link:-
>> >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with >> >>>> the
>> >>>> Subject:- faq
>> >>>>
>> >>>
>> >>> ** To leave the list, click on the immediately-following link:-
>> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >>> ** If this link doesn't work then send a message to:
>> >>> ** ddots-l-request@xxxxxxxxxxxxx
>> >>> ** and in the Subject line type
>> >>> ** unsubscribe
>> >>> ** For other list commands such as vacation mode, click on the
>> >>> ** immediately-following link:-
>> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> >>> Subject:- faq
>> >>>
>> >>>
>> >> ** To leave the list, click on the immediately-following link:-
>> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> >> ** If this link doesn't work then send a message to:
>> >> ** ddots-l-request@xxxxxxxxxxxxx
>> >> ** and in the Subject line type
>> >> ** unsubscribe
>> >> ** For other list commands such as vacation mode, click on the
>> >> ** immediately-following link:-
>> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> >> Subject:- faq
>> >>
>> >
>> > ** To leave the list, click on the immediately-following link:-
>> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> > ** If this link doesn't work then send a message to:
>> > ** ddots-l-request@xxxxxxxxxxxxx
>> > ** and in the Subject line type
>> > ** unsubscribe
>> > ** For other list commands such as vacation mode, click on the
>> > ** immediately-following link:-
>> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> > Subject:- faq
>> >
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>> -- >> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date:>>17/05/2006
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>
> -- > No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.6.0/342 - Release Date:> >
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 19/05/2006
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.6.0/342 - Release Date: 17/05/2006