Well, here on my system, if I go into the audio options dialog box on the first tab, there is a
button called "ASIO panel." If I press the spacebar on it, that opens up the ASIO control panel for
my MOTU. The button in question is just befroe the OK button. I can then go in there and alter the
buffer setting.
Regards, Phil Muir
P J Muir Productions, Music and audio production, Mixing, Mastering: www.philmuir.com/
** To leave the list, click on the immediately-following link:-When you are using asio, the latency stays at zero. You need, however, to change the buffer settings. I believe it's in the advance dialog box. Delta 44 should be fine. I have recorded many projects with it.
Rod ----- Original Message ----- From: "Raymond" <musicalman@xxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, May 21, 2006 12:23 PM Subject: [ddots-l] Re: What's this called, and where do I find it?
aRod, I wasn't sure if it was a SB card or not, but unfortunately it isn't. It'sthedelta44. I'm not good with computers when it comes to memory, so maybe that's the problem. I doubt it, since I only have Jaws and Sonar on it. Also, when I set the latancy to a certain setting, then click okay, I get little to no difference, but maybe that's because the next time I am insurelatancy setting it's set back to what it was by default. Raymond
----- Original Message ----- From: "Rod" <roddj12@xxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Saturday, May 20, 2006 7:10 PM Subject: [ddots-l] Re: What's this called, and where do I find it?
> Raymand, sound blaster cards can be good, however, what Gord and others > are > saying, is that it's not good enough for recording. I am pretty muchthe> that most on the list are sure about that. > I use a delta 44 for a reasonable price, and it's working great! > > Rod > ----- Original Message ----- > From: "Raymond" <musicalman@xxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Saturday, May 20, 2006 6:20 PM > Subject: [ddots-l] Re: What's this called, and where do I find it? > > >> Are you sure about that? I thought the Sound Blaster Live was one of>> best sound cards out there, and if I am going to take that one out,whatuse>> would be a good replacement? >> Raymond >> >> ----- Original Message ----- >> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> >> To: <ddots-l@xxxxxxxxxxxxx> >> Sent: Saturday, May 20, 2006 1:55 PM >> Subject: [ddots-l] Re: What's this called, and where do I find it? >> >> >> > Raymond. >> > Take the sb live card and burn it! You need a better sound card toI>> > any soft synths. >> > Gord >> > ----- Original Message ----- >> > From: "Raymond" <musicalman@xxxxxxxxxx> >> > To: <ddots-l@xxxxxxxxxxxxx> >> > Sent: Saturday, May 20, 2006 1:25 PM >> > Subject: [ddots-l] Re: What's this called, and where do I find it? >> > >> > >> >> I'm using the Cakewalk TTS1 as the synth and I think a Sound blaster > live >> >> as my sound card. I sent this problem before, and I got a suggestion >> >> about the latancy or something like that. No matter where I set it,it> get >> >> little to no difference. If I'm practicing a track before I record,and>> >> works fine, it's just when recording. >> >> Raymond >> >> >> >> ----- Original Message ----- >> >> From: "Chris Smart" <chris_s@xxxxxxxxxxxx> >> >> To: <ddots-l@xxxxxxxxxxxxx> >> >> Sent: Wednesday, May 17, 2006 7:03 PM >> >> Subject: [ddots-l] Re: What's this called, and where do I find it? >> >> >> >> >> >>> At 05:05 PM 5/17/2006, you wrote: >> >>>>I have that same problem in Sonar. Every time I press a note when >> >>>>recording, the keyboard is so sluggish that notes go way off-beet>> >>>>it's sluggish. >> >>> >> >>> What software synth and soundcard are you using? >> >>> >> >>> ** To leave the list, click on the immediately-following link:- >> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >> >>> ** If this link doesn't work then send a message to: >> >>> ** ddots-l-request@xxxxxxxxxxxxx >> >>> ** and in the Subject line type >> >>> ** unsubscribe >> >>> ** For other list commands such as vacation mode, click on the >> >>> ** immediately-following link:- >> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >> >>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >> >>> Subject:- faq >> >>> >> >> >> >> ** To leave the list, click on the immediately-following link:- >> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >> >> ** If this link doesn't work then send a message to: >> >> ** ddots-l-request@xxxxxxxxxxxxx >> >> ** and in the Subject line type >> >> ** unsubscribe >> >> ** For other list commands such as vacation mode, click on the >> >> ** immediately-following link:- >> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >> >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >> >> Subject:- faq >> >> >> >> >> > ** To leave the list, click on the immediately-following link:- >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >> > ** If this link doesn't work then send a message to: >> > ** ddots-l-request@xxxxxxxxxxxxx >> > ** and in the Subject line type >> > ** unsubscribe >> > ** For other list commands such as vacation mode, click on the >> > ** immediately-following link:- >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >> > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >> > Subject:- faq >> > >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** ddots-l-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq >> >> > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq >
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq