[ddots-l] Re: Jaws interfereing with midi ports!
- From: Rui Vilarinho <ruialby@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 8 Feb 2015 13:24:43 +0000
Yeah, dongle gismo for what I know.
Gotta be that .
----- Original Message -----
From: D!J!X!
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, February 06, 2015 5:03 PM
Subject: [ddots-l] Re: Jaws interfereing with midi ports!
I've seen jaws do some weird stuff when using a donle, and once I had to have
fs reset a dongle because years ago syncrosoft messed up the authorization
somehow. If the unit is running on USB, it could be that jaws is trying to
access the usb driver to check if the machine is a dongle? It does periodic
checks for a dongle.
I know of someone who was playing with their motif while it was connected to
the computer, and after an hour or so, jaws came up with a message that said
the computer's date/clock was being altered too much so that jaws would now run
in demo mode. The person never even touched the computer!
Is this laptop running ILM or dongle authorization?
Regards, D!J!X!
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Rui Vilarinho
Sent: Friday, February 06, 2015 11:47 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Jaws interfereing with midi ports!
hmm ... Could be a Dongle license issue ?
----- Original Message -----
From: Rui Vilarinho
To: ddots-l@xxxxxxxxxxxxx
Sent: Friday, February 06, 2015 10:15 AM
Subject: [ddots-l] Jaws interfereing with midi ports!
Hi folks, here goes a challenge,
Do you have any idea if jaws, interferes, somehow, with the midi
connections between the computer and a connected equipment externally?
I ask because it came a very curious phenomenon in this chapter.
My friend had many problems in installing the drivers for the GT-10 pedal,
guitar processor.
After installing the drivers, I managed to connect audio via USB, but there
was no way to be able to establish contact with any midi pedal.
When you open the window patch program editor always gave error, with
messages like error in the configuration of midi ports.
Was even thought that would be the midi connection that is in trouble.
Came another friend who brought a laptop where are installed such editing
programs patches GT-10.
What was my astonishment when he called the USB cable and everything was
working as it should be!
We attribute the problem of failing to establish midi connection with your
installation fails or the drive itself.
Uninstalled and reinstalled everything, and yet it did not work, but
apparently everything was ok.
Suddenly we remembered to turn off the Jaws, and, surprisingly, failed to
give error opening the editing programs such ...
Again was activated Jaws, and, gave same mistake again.
Was tested this on another computer with jaws, and the result was repeated,
gave the midi ports error and the program did not work!
and when I disable Jaws everything works normally.
Yet, strangely the program editor application not always work, though
not appear that error message all the time!
Is also curious that if I open the program with the jaws turn off and then
again load jaws the program editor continues to run correctly.
Do you have any idea what might be going on?
Hmm . my question. Why does jaws have any interference to midi connections
?
Thanks in advance,
Rui Vilarinho
Other related posts:
