Message No! It's checked off! Jean ----- Original Message ----- From: Kevin L. Gibbs To: ddots-l@xxxxxxxxxxxxx Sent: Saturday, October 28, 2006 1:42 PM Subject: [ddots-l] Re: CT 5.2 problem Is your large ransport enabled? Killng that sometimes eliminates a lot of problems. K. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Studio Montebello Sent: Saturday, October 28, 2006 6:25 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: CT 5.2 problem OK George! I had french as well in there even though english US was selected as default. So, I removed the french entry and that solved the problem of CT switching to the french keyboard whenever I hit control downarrow. However, the control down arrow still does not bring me into the clip's pain, it leaves me in the track pain but on a different column! That language setting has always been like this ever since I gbought the computer and CT 4 has never caused me such a problem! In fact, the scrubbing was working perfect in the clip's pain!!! Another problem I found, is that in the EQ of the inspector of an audio track, I cannot activate the EqQ even if I hit enter on the activate button. I get the beep sound but CT reports that the EQ is not activated! Thanks for any help! Jean ----- Original Message ----- From: George Bell To: ddots-l@xxxxxxxxxxxxx Sent: Saturday, October 28, 2006 8:36 AM Subject: [ddots-l] Re: CT 5.2 problem AZERTY is a French keyboard layout. I would only expect this to be used by French users. Suggest you check Control Panel, Regional and Language Options. Navigate to the Languages Tab, and click on the Details button. Check under Installed Services to ensure that only your own native keyboard is listed. George Bell. -------------------------------------------------------------------------- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Chi Kim Sent: 28 October 2006 11:48 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: CT 5.2 problem Yes, I never encountered azerty keyboard mode before. Chi ----- Original Message ----- From: Studio Montebello To: ddots-l@xxxxxxxxxxxxx Sent: Saturday, October 28, 2006 1:26 AM Subject: [ddots-l] Re: CT 5.2 problem Hi Chee! If you save a project and give it a name, is your keyboard in Q W E R T Y mode? Jean ----- Original Message ----- From: Chi Kim To: ddots-l@xxxxxxxxxxxxx Sent: Saturday, October 28, 2006 1:07 AM Subject: [ddots-l] Re: CT 5.2 problem Hi Jean, Wow, that's some interesting stuff. I never heard azerty keyboard. I sometimes find CT messes up template, layout, or toolbars. One of those can prevent ct to find whichever area it needs to access. You might want to initialize them. Hope you can figure this thing out. Cuz ct 5.28 is really relyable for me so far. Chi ----- Original Message ----- From: Studio Montebello To: ddots-l@xxxxxxxxxxxxx Sent: Friday, October 27, 2006 6:33 PM Subject: [ddots-l] CT 5.2 problem Hi folks! I have installed the CT 5.2.8 version. I cannot access the cllip's pain with control down arrow. It leaves me in the track pain but on another row. If I do a control up arrow after a control down arrow, CT reports that this is only available in clip pain, which is where I am supposed to be? A strange thing happens after invoking the control down arrow! My keyboard puts itself in AZERTY mode instead of QWERTY! What's happening? Jean Please visit my Web site at: www.studiomontebello.com