[ddots-l] Re: CT 5.2 problem

Try reinstalling your version, 5.2.8?

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Studio Montebello
Sent: Saturday, October 28, 2006 7:46 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: CT 5.2 problem


    Hey George!
But,  the keyboard layout is not an issue anymore as I only have english
US layout left on my computer.
The issue is that I can't get to the clips pain using control down
arrow!
I checked all windows settings, all sonar settings in accordance with
your documentation and the only thing I have not found are the key
bindings control shift 0 and control shift 1, which, I believe has to do
with the clips pain?
Don't know what else to do!!!
Jean
 

----- Original Message ----- 
From: George Bell <mailto:george@xxxxxxxxxxxxxxxxxxx>  
To: ddots-l@xxxxxxxxxxxxx 
Sent: Saturday, October 28, 2006 9:48 AM
Subject: [ddots-l] Re: CT 5.2 problem

Hi Jean,
 
It sounds like there is a command somewhere causing the switch of
keyboards.  I believe the default is Left Alt + Shift.
 
I'm afraid this is an issue which I shall have to refer to the
developer, since it's a shade out of my league, and may have a bearing
on using International keyboards.
 
George.

  _____  

From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Studio Montebello
Sent: 28 October 2006 14:24
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: CT 5.2 problem


OK George!
I had french as well in there even though english US was selected as
default. So, I removed the french entry and that solved the problem of
CT switching to the french keyboard whenever I hit control downarrow.
However, the control down arrow still does not bring me into the clip's
pain, it leaves me in the track pain but on a different column!
That language setting has always been like this ever since I gbought the
computer and CT 4 has never caused me such a problem! In fact, the
scrubbing was working perfect in the clip's pain!!!
 
Another problem I found, is that in the EQ of the inspector of an audio
track, I cannot activate the EqQ even if I hit enter on the activate
button. I get the beep sound but CT reports that the  EQ is not
activated!
Thanks for any help!
Jean
    

----- Original Message ----- 
From: George Bell <mailto:george@xxxxxxxxxxxxxxxxxxx>  
To: ddots-l@xxxxxxxxxxxxx 
Sent: Saturday, October 28, 2006 8:36 AM
Subject: [ddots-l] Re: CT 5.2 problem


AZERTY is a French keyboard layout.  I would only expect this to be used
by French users.
 
Suggest you check Control Panel, Regional and Language Options.
Navigate to the Languages Tab, and click on the Details button.  Check
under Installed Services to ensure that only your own native keyboard is
listed.
 
George Bell.

  _____  

From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Chi Kim
Sent: 28 October 2006 11:48
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: CT 5.2 problem


Yes, I never encountered azerty keyboard mode before.
 
Chi

----- Original Message ----- 
From: Studio Montebello <mailto:studiomontebello@xxxxxxxxxxxx>  
To: ddots-l@xxxxxxxxxxxxx 
Sent: Saturday, October 28, 2006 1:26 AM
Subject: [ddots-l] Re: CT 5.2 problem

    Hi Chee!
If you save a project and give it a name, is your keyboard in Q W E R T
Y  mode?
Jean
 

----- Original Message ----- 
From: Chi  <mailto:ms22282@xxxxxxxxxxx> Kim 
To: ddots-l@xxxxxxxxxxxxx 
Sent: Saturday, October 28, 2006 1:07 AM
Subject: [ddots-l] Re: CT 5.2 problem

Hi Jean,
 
Wow, that's some interesting stuff. I never heard azerty keyboard. I
sometimes find CT messes up template, layout, or toolbars. One of those
can prevent ct to find whichever area it needs to access. You might want
to initialize them.

Hope you can figure this thing out. Cuz ct 5.28 is really relyable for
me so far.
 
Chi
----- Original Message ----- 
From: Studio Montebello <mailto:studiomontebello@xxxxxxxxxxxx>  
To: ddots-l@xxxxxxxxxxxxx 
Sent: Friday, October 27, 2006 6:33 PM
Subject: [ddots-l] CT 5.2 problem


Hi folks!
I have installed the CT 5.2.8 version.
I cannot access the cllip's pain with control down arrow.  It leaves me
in the track pain but on another row.
If I do a control up arrow after a control down arrow, CT reports that
this is only available in clip pain, which is where I am supposed to be?
A strange thing happens after invoking the control down arrow! My
keyboard puts itself in AZERTY mode instead of QWERTY!
What's happening?
Jean
 
Please visit my Web site at: www.studiomontebello.com

Other related posts: