[ddots-l] Re: CT 5.2 problem

    Hey George!
But,  the keyboard layout is not an issue anymore as I only have english US 
layout left on my computer.
The issue is that I can't get to the clips pain using control down arrow!
I checked all windows settings, all sonar settings in accordance with your 
documentation and the only thing I have not found are the key bindings control 
shift 0 and control shift 1, which, I believe has to do with the clips pain?
Don't know what else to do!!!
Jean

  ----- Original Message ----- 
  From: George Bell 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Saturday, October 28, 2006 9:48 AM
  Subject: [ddots-l] Re: CT 5.2 problem


  Hi Jean,

  It sounds like there is a command somewhere causing the switch of keyboards.  
I believe the default is Left Alt + Shift.

  I'm afraid this is an issue which I shall have to refer to the developer, 
since it's a shade out of my league, and may have a bearing on using 
International keyboards.

  George.



------------------------------------------------------------------------------
  From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On 
Behalf Of Studio Montebello
  Sent: 28 October 2006 14:24
  To: ddots-l@xxxxxxxxxxxxx
  Subject: [ddots-l] Re: CT 5.2 problem


  OK George!
  I had french as well in there even though english US was selected as default. 
So, I removed the french entry and that solved the problem of CT switching to 
the french keyboard whenever I hit control downarrow.
  However, the control down arrow still does not bring me into the clip's pain, 
it leaves me in the track pain but on a different column!
  That language setting has always been like this ever since I gbought the 
computer and CT 4 has never caused me such a problem! In fact, the scrubbing 
was working perfect in the clip's pain!!!

  Another problem I found, is that in the EQ of the inspector of an audio 
track, I cannot activate the EqQ even if I hit enter on the activate button. I 
get the beep sound but CT reports that the  EQ is not activated!
  Thanks for any help!
  Jean
      
    ----- Original Message ----- 
    From: George Bell 
    To: ddots-l@xxxxxxxxxxxxx 
    Sent: Saturday, October 28, 2006 8:36 AM
    Subject: [ddots-l] Re: CT 5.2 problem


    AZERTY is a French keyboard layout.  I would only expect this to be used by 
French users.

    Suggest you check Control Panel, Regional and Language Options.  Navigate 
to the Languages Tab, and click on the Details button.  Check under Installed 
Services to ensure that only your own native keyboard is listed.

    George Bell.



----------------------------------------------------------------------------
    From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On 
Behalf Of Chi Kim
    Sent: 28 October 2006 11:48
    To: ddots-l@xxxxxxxxxxxxx
    Subject: [ddots-l] Re: CT 5.2 problem


    Yes, I never encountered azerty keyboard mode before.

    Chi
      ----- Original Message ----- 
      From: Studio Montebello 
      To: ddots-l@xxxxxxxxxxxxx 
      Sent: Saturday, October 28, 2006 1:26 AM
      Subject: [ddots-l] Re: CT 5.2 problem


          Hi Chee!
      If you save a project and give it a name, is your keyboard in Q W E R T Y 
 mode?
      Jean

        ----- Original Message ----- 
        From: Chi Kim 
        To: ddots-l@xxxxxxxxxxxxx 
        Sent: Saturday, October 28, 2006 1:07 AM
        Subject: [ddots-l] Re: CT 5.2 problem


        Hi Jean,

        Wow, that's some interesting stuff. I never heard azerty keyboard. I 
sometimes find CT messes up template, layout, or toolbars. One of those can 
prevent ct to find whichever area it needs to access. You might want to 
initialize them.
          Hope you can figure this thing out. Cuz ct 5.28 is really relyable 
for me so far.

          Chi
          ----- Original Message ----- 
          From: Studio Montebello 
          To: ddots-l@xxxxxxxxxxxxx 
          Sent: Friday, October 27, 2006 6:33 PM
          Subject: [ddots-l] CT 5.2 problem


          Hi folks!
          I have installed the CT 5.2.8 version.
          I cannot access the cllip's pain with control down arrow.  It leaves 
me in the track pain but on another row.
          If I do a control up arrow after a control down arrow, CT reports 
that this is only available in clip pain, which is where I am supposed to be?
          A strange thing happens after invoking the control down arrow! My 
keyboard puts itself in AZERTY mode instead of QWERTY!
          What's happening?
          Jean

          Please visit my Web site at: www.studiomontebello.com

Other related posts: