[ddots-l] Re: [Bulk] Re: laptop power problems
- From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 26 Jan 2010 11:58:54 -0800
Steve,
What is the name of the vendor, or the web site?
Dave
----- Original Message -----
From: "Steve Wicketts" <steve.wicketts@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, January 26, 2010 11:56
Subject: [Bulk] [ddots-l] Re: laptop power problems
Hi Bill,
The one I got was under #20 and it took away all the high interference
sounds from the lap top.
It doesn't plug in to the wall or anything like that, it simply has two male
phonos on a short cable which is attached to a barrel about the size of a
coke can you get on a plain, at the other end of the barrel is another cable
with female phonos.
Steve W
----- Original Message -----
From: "Dancing Dots" <billlist1@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, January 26, 2010 6:43 PM
Subject: [ddots-l] Re: laptop power problems
> Hi, Steve,
>
> What would a good Ground Loop Isolator cost?
>
> Regards,
> Bill
>
> Bill McCann
> Founder and President of Dancing Dots since 1992
> www.DancingDots.com
> Tel: [001] 610-783-6692
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Steve Wicketts
> Sent: Tuesday, January 26, 2010 4:39 AM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: laptop power problems
>
> Hi Mark,
>
> My lap top was also built for me purely as a music computer.
> The thing about lap tops is, Some of the circuitry is not insulated that
> well which can caurse audio noyce.
> Tthis happens even on expensive lap tops as they are not quite as
> inserlated
> as say a PC.
>
> It was a high noice I was getting on my lap top, it also would disappear
> when using the battery power.
> I simply plut the male phonos from the Ground Loop Iserlater into the
> audio
> outs on my Fast Track Pro Sound card then plug the audio cables that go to
> my mixer into the female phonos on the Ground loop iserlater.
> I'm almost certain a Ground loop icerlater will work.
>
> Try this first before messing with electrics.
>
> Steve W
>
> ...
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 4807 (20100126) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 4807 (20100126) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
