[darkice] Re: Cant Get Creative E-MU USB audio interface to work

  • From: Ben Edwards <list4me2@xxxxxxxxx>
  • To: darkice@xxxxxxxxxxxxx
  • Date: Tue, 14 Jun 2016 13:08:39 +0100

Thanks, will give it a try.

On 7 June 2016 at 12:27, Niels Dettenbach <nd@xxxxxxxxxxxx> wrote:

Am Dienstag, 7. Juni 2016, 12:11:25 schrieb Ben Edwards:
I am actually streaming and dumping the stream to a USB stick, maybe it
is
the later that is causing the problem.
Would try (if possible for you) to disable this and any other tasks your
rapberry is doing now.  Even on faster machines it seems to me that
encoding
and streaming with darkice is working most reliable when there are no other
jobs to do (even with higher cpu priority and iopriority...

With tracking to usb storage on try to watch (i.e. with "top" or "htop",
"vmstat", "iotop" etc.) the development of ram and buffer usage and/or if
any
system resources are going on their limits.

I do not own a raspberry, but encoding of mp3/off and continuesly writing
to a
USB stick could take significant resources. You might try another USB
storage
(i.e. a real USB disk) for test to make shure that i.e. the USB Sticks wear
leveling is not blocking to long. I remember similiar problems in
measurement
devices where USB flash storage was not able to take more then some hours
of
writing...


good luck and
best regards,


Niels.

--
 ---
 Niels Dettenbach
 Syndicat IT & Internet
 http://www.syndicat.com
 PGP: https://syndicat.com/pub_key.asc
 ---







-- 
*Ben Edwards, Video Editor and Cameraman*
*web*:*www.nkytwig.com* <http://funkytwig.com/>* mobile:**07773 02 44 82*
*skype**:**funkytwig** twitter:**@funkytwig*
<https://twitter.com/funkytwig>iContact Community Video
<http://www.icontactvideo.org/> | Bristol Community Channel
<http://bristol.mirocommunity.org/>

Other related posts: