My experience and opinions only. Replay Media Catcher 6 If you want to set the settings use NVDA as JAWS sometimes will lose focus with the settings window. The fix is to exit out of RMC6 and run RMC6 and go to the settings. You will hear after each setting feature the screen reader say the word switch is on or off. So on means its enabled and off means it not enabled / not selected. To rehear your setting do a shift+tab then a tab and you will hear the on / off. Once you have set the settings to your personal preferences you will not need to tinker with the settings in the future. On the main user interface of RMC6 there is a list of tab controls and think of these as controls. Again, JAWS 16 will lose focus on these tab controls but can still be found and heard. NVDA never loses focus of these tab controls. The tab controls are in this order; Home H Guides G Schedule S Settings S Get Support G The tab controls mentioned above can be found by tabbing to and then stopping at where you hear the screen reader say "When the switch is on media streams orif you have stopped tabbing and re-reads the item with JAWS insert+tab it will say Automatically detect and download... When you hear this by your screen reader simply shift+tab one time and then down arrow you will hear one of the tab controls like; Home H Guides G Schedule S Settings S Get Support G The reason I have provided the one letter after each tab controls name is JAWS will lose focus with these tab control names but JAWS will say when focus is lost the following as you up or down the tab controls as; H which is your Home tab control G which is your Guides tab control S which is your Schedule tab control S which is your settings tab control G which is your Get Support tab control So once on the tab control like the Settings simply tab two times and you will hear or not hear the five tab property sheets that are available within the settings Window. With JAWS do a insert+tab or insert+numpad 8 to hear the actual tab sheet name as you navigate left or right on the tab sheets that are sometime not read back. If you hear JAWS say 'selected' you are on one of the tab sheets so do a insert+tab and you will hear the actual tab sheet name you have focus on. You can do a ctrl+tab to jump to the next tab sheet properties or Shift+ctrl+tab to go in reverse to the previous tab sheet properties. All is not lost. It works when you know what to look for. NVDA does not exhibit these issues in my testing. The settings tab control tab sheets are; Personalization Output folder Internet Downloads Audio Recording DVR Naming Rules Takes some practice with JAWS. More tips Your captures are always placed in this listbox and you must be within the Home tab control area. One way to know if you are in the Home tab control area is you will hear this URL edit field entry spoken as you tab around or better yet always use the special and valuable shortcut key ctrl+l This ctrl+l will place focus immediatly inside the URL address edit box where you can paste in the URL address you want to capture. Once you have pasted in the URL address with ctrl+v simply press your enter keyboard key and the capture / download begins. So Locate the Home tab control if you are lost. Again you can find this Home tab ontrol or one of the other tab ontrols by first tabbing around and listening for the the Switch is on the media... or when stopped tabbing and re-reads the element you will hear Automatically detect and download... so shift+tab one time from here and then down arrow and locate the Home tab control. When you have focus on the Home tab control simply shift+tab a few times to hear the listbox view. This is where your captures / recordings are shown. If you are using JAWS and focus is lost listen for the letter H and this tells you that you are on the Home tab control and then shift+tab a few times to locate the listbox view. If you happen to hear as you are shift+tabbing the following items then a capture as occurred; properties show in folder play and maybe one or two other items that I cannot remember at this time you are all good. Another tip You must be in the Home H tab control to find the When the Switch is on... item as you tab around. When you hear this When the Switch is on item simply press your spacebar to activate the start mode. This start mode will make a sound effect for you. This tells the user its ready to capture your media streams on the fly so go to your browser and test some media you want to capture. Your captures will appear in the Home tab control listbox view. To stop the Start mode process simply locate where your screen reader says the When the Switch is on media streams ... and press spacebar and you will hear the stop sound effect. Note: The first time you try to capture you will get this pop up setting message asking you on how you want the captures. So set the settings. Believe they were like Hi, medium and low and media formats like MP4, FLV aand some other formats. Also if you need to tweek These settings you can go later on to the Settings tab control > Internet Downloads tab sheet properties. You will hear when multiple streams... and formats... Use your insert+tab or insert+numpad8 with JAWS to re-read the control that you have focus on. New tip Say you want to capture just one media and its a URL address you have copied with ctrl+c then you can simply press ctrl+l and the URL edit box appears for you. simply paste in the URL with ctrl+v and hit your ENTER keyboard key to activate the capture. Press your tab key 3 times and you will hear the list view box. The file will be shown in this list box view. You must be inside the Home tab control center to hear this list box view. You cannot be for example within the settings tab control center to hear this list box view. New Tip To capture in a different mode locate the Capture Method control while within the Home tab control center. The screen reader will say Capture Method button and this is it. Press your spacebar and you will hear; Stream Downloader and this is the default. Audio Recorder - use this when stream downloader does not work but it will be a second by second, bit by bit recording. Digital Video Recorder Choose the option you need. If you have chosen the Audio Recorder option the user interface will change. Notice the split recording and start recording buttons? After you have pressed the start rcording button with spacebar simply press shift+tab and then tab to re-read the start recording button and you will hear it say stop recording button because this is a toggle button. When the DVr is chosen try pressing ctrl+l to open the URL edit field box, paste in the URL and press enter key to capture. I was told the buttons within the DVR are not labeled for screen reader users. There are 3 unlabeled buttons. ----- Original Message ----- From: "" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "lifemyway@xxxxxxxxx" for DMARC) <dmarc-noreply@xxxxxxxxxxxxx> To: <blindreplay@xxxxxxxxxxxxx> Sent: Saturday, February 21, 2015 4:36 PM Subject: [blindreplay] replay media catcher 6 Ok, i just updated to version 6 of replay media catcher. How would i use this some of the stuff does not read correctly with jaws,nvda, and or window eyes. so please advise which would the encripted conted work with streaming audior recording or digital recording. please help me out. -- To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with unsubscribe in subject To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com -- To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with unsubscribe in subject To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx