[argyllcms] Re: Display Calibration Hardware Capabilities

  • From: Graeme Gill <graeme@xxxxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Sat, 04 Feb 2012 12:06:00 +1100

János, Tóth F. wrote:
> Is this a right conclusion from this data and is this a good advice in
> general (to get an i1d3 and forget you have a CM spectro when you
> calibrate displays)?

It's not that clear cut, particularly using Argyll adaptive.

The i1d3 will probably be faster and suffer from less drift
in the black calibration.

A good combination is to use the spectro to create a .ccss to
better calibrate the i1d3 to that particular type of display
(and remember, the .ccss will work with all other i1d3's just
as well for that type of display).

Graeme Gill.

Other related posts:

  1. Home
  2. argyllcms
  3. Archive
  4. 02-2012