In data lunedì 11 gennaio 2010 09:03:33, Bruce Houston ha scritto: > Thank you again for your help with the Munki driver for Win 7 x64; and > please forgive my being a pest by asking for additional assistance. I > really, really look forward to using ArgyllCMS with the Munki. > > I believe that the ColorMunki.inf file needs a tweak or two. First, the > Signature line of the Version section reads "$Chicago$" and causes the > driver installation to fail in Win7 x64 with the message "this driver is > for a different platform" (or the like). Changing this parameter to > "$Windows NT$" gets rid of this error and allows the driver to install. > > After installation, however, the following three driver components show up > in Device Manager under "LibUSB-Win32 Devices"-->"ColorMunki (Argyll)": > > c:\Windows\system32\drivers\libusb0.sys > c:\Windows\system32\libusb0.dll > c:\Windows\syswow64\libusb0.dll > > Neither libusb0_x64.dll nor libusb0_x64.sys is to be found. I believe that > this may be due to other problems in ColorMunki.inf. Problem is, with my > level of familiarity with .inf files, I would really be mucking around by > attempting to further mod ColorMunki.inf. > > Also, Plug-N-Play re-installs the X-rite ColorMunki driver ever time that > the device is plugged into USB, notwithstanding that I specify "delete > driver files" when uninstalling the X-rite driver. Perhaps that behaviour > would stop if I can get the Argyll x64 driver correctly installed. I am > not sure about that, though, because the Argyll driver shows up under a > different category of devices in Device Manager ("LibUSB" vs. "X-rite"). > Thus, I am not sure whether Windows can recognize that it is installing > and making active a second driver for the same device. I confirm I noticed the same issues. Niccolò