[amayausers.com] Re: Metallic Thread
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 3 Dec 2010 04:13:37 UT
This message was posted by Debbie Garifi on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1075.html#000001
Here is what worked for me when I did 100+ warm-up track jackets: I set the
color settings for just the metallic thread for this so if you are using a
combination of regular poly thread and metallic the setting need to be done by
color#.
I used "Standard", not auto. 1100 SPM, 50 column feed, 100 Fill/Run Feed and 8
material feed. Tail=medium and Trim=Metallic.
Hope this helps out.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
