[amayausers] Re: Die Cut Lettering

Thanks.  I guess $25 will have to do it ;)


On Tue, 21 Sep 2004 12:01pm, Linen Barn wrote:
> I am not sure you will find an inexpensive way to just do one.  Usually
> anything that requires a disk from these companies costs around $25 for 
> the
> disk.  You might try to call Dalco and /or Stahls and talk to them to 
> see
> what they can do for you.  Dalco is 800-288-3252.  I don't have Stahl's 
> # as
> I have never used them.
>
> Aaron Sargent
> The Linen Barn
> linen@xxxxxxxxxxx
> Medford, Oregon
> ----- Original Message -----
> From: "John Yaglenski" <john@xxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Tuesday, September 21, 2004 8:44 AM
> Subject: [amayausers] Re: Die Cut Lettering
>
>
>>  Hey Aaron:
>>
>>  I thought I read that you said the program you are referring to is
>>  expensive.  And will they do a short run of only one?  I guess we 
>> could
> use
>>  it down the line, but right now, I only wanted to make one, so I am
> looking
>>  for an economical out.  Just seems like we have been spending lots of
> money
>>  lately ;)
>>
>>  John
>>
>>  : -----Original Message-----
>>  : From: amayausers-bounce@xxxxxxxxxxxxx
>>  : [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Linen Barn
>>  : Sent: Tuesday, September 21, 2004 11:31 AM
>>  : To: amayausers@xxxxxxxxxxxxx
>>  : Subject: [amayausers] Re: Die Cut Lettering
>>  :
>>  : John,
>>  :
>>  : I do this type of lettering all the time for athletics.  I
>>  : use Dalco because I have their stockstitch program which
>>  : works with their stock letters, #'s and symbols.  I have also
>>  : had them create custom applique' for me for softball
>>  : uniforms.  Not sure how reasonable they are but you can also
>>  : try Stahls, they do the same thing.
>>  :
>>  : Aaron Sargent
>>  : The Linen Barn
>>  : linen@xxxxxxxxxxx
>>  : Medford, Oregon
>>  : ----- Original Message -----
>>  : From: "John Yaglenski" <john@xxxxxxxxxxxxx>
>>  : To: <amayausers@xxxxxxxxxxxxx>
>>  : Sent: Tuesday, September 21, 2004 8:20 AM
>>  : Subject: [amayausers] Die Cut Lettering
>>  :
>>  :
>>  : > Hey all:
>>  : >
>>  : > I want to produce jackets for a website I run INTERCOT
>>  : > (http://www.intercot.com) and I have bought a hooded nylon
>>  : jacket with
>>  : > fleece lining.  What I want to do is put in big letters
>>  : INTERCOT across
>>  : the
>>  : > back in an arch (like high school or college jackets).
>>  : Where are some
>>  : > places that will cut the lettering with sew out disc and
>>  : send to me that
>>  : are
>>  : > reasonably priced.  I wanted to produce one and pop it on
>>  : the site to see
>>  : > what feedback and orders would be like, so at this point,
>>  : it's not really
>>  : a
>>  : > production run.
>>  : >
>>  : > Also, has anyone had experience with this before and how did it 
>> go?
>>  : >
>>  : > Comments or suggestions are appreciated :)
>>  : >
>>  : > - - - - - - - -
>>  : > John Yaglenski
>>  : > Levelbest Embroidery
>>  : >
>>  : > I: www.levelbestembroidery.com
>>  : > P: 301.591.2481
>>  : > P: 888.229.1779
>>  : > F: 781.998.6473
>>  : >
>>  : > This e-mail message and any attachments are confidential and may 
>> be
>>  : > privileged.  If you are not the intended recipient, please notify
>>  : Levelbest,
>>  : > immediately -- by replying to this message or by sending an
>>  : e-mail to
>>  : > john@xxxxxxxxxxxxx -- and destroy all copies of this message and 
>> any
>>  : > attachments.  Thank you.
>>  : >
>>  : >
>>  : >
>>  : >
>>  :
>>  :
>>  :
>>  :
>>
>>
>>
----
John Yaglenski
President/Chief Executive Officer
Levelbest Communications

i: http://www.levelbest.com
e: john@xxxxxxxxxxxxx

active website design . web hosting . content driven websites

Other related posts: