[amayausers] Re: Die Cut Lettering

Actually, makes perfect sense.  :) 

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of DLCompton@xxxxxxx
Sent: Tuesday, September 21, 2004 11:11 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Die Cut Lettering

 
Another idea to make your own applique letters is to stitch only the
outline stitches of the letters on the applique fabric; cut them out along
the stitch lines. Then hoop your garment, use your new appliques as you sew
out your design (first outline indicates placement, second outline tacks
down then satin  stitch). You would use adhesive spray to hold the applique
on to the garment.  Hope this makes sense.
 
You could also stitch the outlines on a "reusable" template (i.e.
cardstock) to then cut out your applique fabric.
 
 
Dorothy  Compton
Bee Embroidered
_www.BeeEmbroidered.com_ (http://www.beeembroidered.com/)
(916)  635-7467
Rancho Cordova, CA
 
 
In a message dated 9/21/2004 5:04:54 PM Pacific Daylight Time,
ron@xxxxxxxxxxxxxxxxxxx writes:

Another  suggestion for a one off,
is if you have the capability to digitize or have  someone who can for you.
just run a running stitch line inside the outline  of your lettering.
then stop the machine and don't unhoop the jacket.  carefully cut away the
excess fabric (this will take a while.) or stop it  after individual letters
and trim it then sew the next letter.
anyway when  it's done restart and let the machine sew a satin stitch around
the letters  that will conceal the cut edges which is why you want to cut
closely.
this will work fine when you only need a one off for a photo or to  wear and
show around.
for production this method will kill  ya!!

Other related posts: