[windows2000] Re: Networking Question
- From: Aaron Dokey <adokey@xxxxxxxxxxxx>
- To: "'windows2000@xxxxxxxxxxxxx'" <windows2000@xxxxxxxxxxxxx>
- Date: Wed, 9 Oct 2002 11:12:34 -0400
Depending on what the switch is that you're going to be putting in the
middle, and if you already own it or not, it may actually be cheaper.
-Aaron
-----------------------
Aaron Dokey - MIS
Reid Tool Supply
2265 Black Creek Rd.
Muskegon, MI 49444
(231) 777-3951
(231) 767-3772 (Direct)
-----------------------
-----Original Message-----
From: Greg Reese [mailto:GReese@xxxxxxxxxxxxxxxx]
Sent: Wednesday, October 09, 2002 11:02 AM
To: windows2000@xxxxxxxxxxxxx
Subject: [windows2000] Re: Networking Question
not an option, I already asked. =20
-----Original Message-----
From: Joe Shonk [mailto:JShonk@xxxxxxxxxxxxxx]
Sent: Wednesday, October 09, 2002 11:00 AM
To: windows2000@xxxxxxxxxxxxx
Subject: [windows2000] Re: Networking Question
Drop a fiber connection.
Joe
-----Original Message-----
From: Greg Reese [mailto:GReese@xxxxxxxxxxxxxxxx]
Sent: Wednesday, October 09, 2002 5:57 AM
To: windows2000@xxxxxxxxxxxxx
Subject: [windows2000] Networking Question
I have to figure out a way to get some additional network connections to =
=3D
=3D3D
a location in our building for a bunch of thin clients and wireless =
=3D3D
tablets. That location currently has one connection already. I need it =
=3D
=3D3D
to have about 8.=3D3D20
This location is about 400' from my main communications room where the =
=3D
=3D3D
main switch is located. To get the existing connection there, it goes =
=3D
=3D3D
through a hub which is right in the middle. =3D3D20
SWITCH ----200'----> HUB ----200'----> outlet.
I was thinking about adding a switch in with the hub for that connection =
=3D
=3D3D
then adding another switch at the end for all the extra devices I need.
SWITCH ----200'----> HUB
SWITCH ----200'----> SWITCH----200'----> outlet -> SWITCH =
=3D3D3D=3D3D3D>> =3D
=3D3D
Devices
The hub is already full and all the new connections I need are in the =
=3D
=3D3D
same place. I have two runs of cable from the main switch to the hub =
=3D
=3D3D
but only one is used.
Am I inviting disaster by stringing that many switches together. Would =
=3D
=3D3D
it be better to use a repeaters or something rather than a switch?
Any ideas are greatly appreciated.
Greg
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/win2000list.cfm
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/win2000list.cfm
==================================
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/win2000list.cfm
==================================
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/win2000list.cfm
Other related posts:
