Wow. That's pretty intense. You checked all the TunerPro forums? On Wed, Nov 16, 2011 at 5:05 PM, David Allen <davida1@xxxxxxxxxx> wrote: > ** > Ryan, it has a one-unit PCM that does all engine and transmission > functions. > > > ----- Original Message ----- > *From:* Ryan Eaton <architechnik@xxxxxxxxx> > *To:* tunerpro@xxxxxxxxxxxxx > *Sent:* Tuesday, November 15, 2011 7:05 PM > *Subject:* [tunerpro] Re: Question about Aurora XDF > > Do you know if that is directly controlled by the ECU or if that is based > off of TCU control? The computer for the transmission is often quite > independent of the ECU for the engine and only relies on a few signals > between the two. It may even be a matter of cutting a single wire that > controls that part of the operation. > > -Ryan > > On Wed, Nov 16, 2011 at 4:24 PM, David Allen <davida1@xxxxxxxxxx> wrote: > >> Hello all. I've been unsuccessfully looking for an XDF for a 1995 Olds >> Aurora 4.0. >> >> I've looked for this on and off for about 2 years. >> >> Anyone have info it would be greatly appreciated. Specifically I am >> trying to turn off the diagnostics for transmission and turn off adaptive >> shifting. >> >> Thanks in advance! >> Sincerely, >> David >> Visit the TunerPro web site at http://www.tunerpro.net/ >> To unsubscribe, email tunerpro-request@xxxxxxxxxxxxx with “unsubscribe” >> in the Subject, or visit >> http://www.tunerpro.net/**mailingList.htm<http://www.tunerpro.net/mailingList.htm> >> . >> > >