Robert, have you posted your XDF anywhere? I would like to give it a try. Thanks, David ----- Original Message ----- From: Robert Saar To: tunerpro@xxxxxxxxxxxxx Sent: Wednesday, November 16, 2011 7:02 PM Subject: [tunerpro] Re: Question about Aurora XDF i've written a very basic XDF for the 95 Northstar/Aurora PCMs(93 and 94 have different code masks), but they are quite complex and i'm sure a lot is missing. i originally disassembled and wrote the XDF to grab values out of the factory tunes for a good starting place to use a 94-95 truck PCM and use $0D as a trans-only controller. --- On Wed, 11/16/11, David Allen <davida1@xxxxxxxxxx> wrote: From: David Allen <davida1@xxxxxxxxxx> Subject: [tunerpro] Re: Question about Aurora XDF To: tunerpro@xxxxxxxxxxxxx Date: Wednesday, November 16, 2011, 8:39 PM Yep, it was the last year before OBDII came in. I did look and all I could find was an ALDL data definition. I've been looking for this for about 2 years actually! ----- Original Message ----- From: Ryan Eaton To: tunerpro@xxxxxxxxxxxxx Sent: Tuesday, November 15, 2011 7:40 PM Subject: [tunerpro] Re: Question about Aurora XDF Wow. That's pretty intense. You checked all the TunerPro forums? On Wed, Nov 16, 2011 at 5:05 PM, David Allen <davida1@xxxxxxxxxx> wrote: Ryan, it has a one-unit PCM that does all engine and transmission functions. ----- Original Message ----- From: Ryan Eaton To: tunerpro@xxxxxxxxxxxxx Sent: Tuesday, November 15, 2011 7:05 PM Subject: [tunerpro] Re: Question about Aurora XDF Do you know if that is directly controlled by the ECU or if that is based off of TCU control? The computer for the transmission is often quite independent of the ECU for the engine and only relies on a few signals between the two. It may even be a matter of cutting a single wire that controls that part of the operation. -Ryan On Wed, Nov 16, 2011 at 4:24 PM, David Allen <davida1@xxxxxxxxxx> wrote: Hello all. I've been unsuccessfully looking for an XDF for a 1995 Olds Aurora 4.0. I've looked for this on and off for about 2 years. Anyone have info it would be greatly appreciated. Specifically I am trying to turn off the diagnostics for transmission and turn off adaptive shifting. Thanks in advance! Sincerely, David Visit the TunerPro web site at http://www.tunerpro.net/ To unsubscribe, email tunerpro-request@xxxxxxxxxxxxx with “unsubscribe” in the Subject, or visit http://www.tunerpro.net/mailingList.htm.