hi. i have made the connection to the 16mhz clock, but still no luck. Is
anyone willing to check and provide the chip and pin for this connection?
There are multiple phases, so maybe the standard clock output is not right.
regards,
jerry
Sent from my iPad
On Apr 1, 2015, at 5:21 PM, Jerome Coggins <jeromecoggins@xxxxxxxxxxx> wrote:
Thanks. I don't know about the connection under the 8032 board. I will
check. It out.
Jerry
Sent from my iPad
On Apr 1, 2015, at 2:42 PM, Steve Gray <sjgray@xxxxxxxxxx> wrote:
Ok, do you have all the parts?
- two boards (cpu and memory)
- two ribbon cables
- power extender cable
- One or two switches: 6502/prog/6809 and maybe U11/U2 something (forget
exactly)
Connections:
- short ribbon cable connects the two boards together
- longer ribbon cable connects to 8032 board's CPU socket and SuperPET cpu
board
- power extender goes from SuperPET CPU board to 8032 board.CPU transplanted
onto SuperPET board.
-original power cable plugs into SuperPET CPU board
- switch(es) go to SuperPET CPU board
Check:
- Is there a small board in the slot on the memory board?
- Does your 8032 board have the wire on the bottom running from the 16MHz
signal to the cpu socket?
- Does your 8032 board have a 4K character generator rom?
Steve
From: Jerome Coggins <jeromecoggins@xxxxxxxxxxx>
To: torontocbm <torontocbm@xxxxxxxxxxxxx>
Sent: Wednesday, April 1, 2015 2:20 PM
Subject: [torontocbm] Upgrade to Superpet
Hi. I have a PET 8032 and have a two-board Superpet upgrade kit. Can
anyone provide me with instructions and/or insights on doing this. At first
connection i have gotten nothing to work after installation.
Regards.
Jerry
Sent from my iPad
