This is even possible using a quadportiec? Anyone have one?
The setup I am trying is:
Port 1 = sd2iec drive #8
Port 2 = 1581’s drive #8,9
Port 3= 1541’s #drive #8,9
Port 4 = 1571 # drive 10
When I have only port 1 on and the rest off, it doenst seem to work. In fact I
don’t
Get a ready prompt, unless I unplug all the other drives.
I have tried numerous ways to wire this up, but the quadportiec, I am
assuming, still allows
To see the other drives regardless of the switch.
Any thought to why?
Frank
