Ok, do you have all the parts?- two boards (cpu and memory)- two ribbon cables-
power extender cable- One or two switches: 6502/prog/6809 and maybe U11/U2
something (forget exactly)
Connections:- short ribbon cable connects the two boards together- longer
ribbon cable connects to 8032 board's CPU socket and SuperPET cpu board
- power extender goes from SuperPET CPU board to 8032 board.CPU transplanted
onto SuperPET board. -original power cable plugs into SuperPET CPU board-
switch(es) go to SuperPET CPU board
Check:- Is there a small board in the slot on the memory board?- Does your 8032
board have the wire on the bottom running from the 16MHz signal to the cpu
socket?- Does your 8032 board have a 4K character generator rom?
Steve
From: Jerome Coggins <jeromecoggins@xxxxxxxxxxx>
To: torontocbm <torontocbm@xxxxxxxxxxxxx>
Sent: Wednesday, April 1, 2015 2:20 PM
Subject: [torontocbm] Upgrade to Superpet
Hi. I have a PET 8032 and have a two-board Superpet upgrade kit. Can anyone
provide me with instructions and/or insights on doing this. At first
connection i have gotten nothing to work after installation.
Regards.
Jerry
Sent from my iPad
