Did you refresh/recreate the LHC of the ZDC and whatever server(s) the WI is pointing to? Jeff On 9/15/05, Walter, Chris <christopher.walter@xxxxxxx> wrote: > > That is exactly how it is setup. For some reason the majority of the > users are going to one zone. However there are people who should be > connecting to the second zone which should be connecting to first as well. > > Chris > > ------------------------------ > > *From:* Joe Shonk [mailto:joe.shonk@xxxxxxxxx] > *Sent:* Thursday, September 15, 2005 12:10 PM > *To:* thin@xxxxxxxxxxxxx > *Subject:* [THIN] Re: Zone preference and failover not working > > How are the clients contacting the farm? Is the first group setting it's > client to point to zone 1 as the primary with zone 2 as a secondary? Then > the reverse for users of zone 2? > > Joe > > ------------------------------ > > *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On > Behalf Of *Walter, Chris > *Sent:* Thursday, September 15, 2005 9:05 AM > *To:* 'thin@xxxxxxxxxxxxx' > *Subject:* [THIN] Zone preference and failover not working > > Hi all, > > Have Windows 2003 with MPS 3.0 Enterprise edition. I have a policy for > one group that sets the Primary group to a specific zone and same with the > backup. I have a second policy that sets it to the reverse for another group > (We have two zones). The Zone preference and failover doesn't seem to be > working, users are connecting to either zone randomly. I am not sharing load > information between zones. Any idea's why this isn't working? > > Thanks, > > Chris > >