I thought I read somewhere that you had to use the PN Agent for this feature to work... I could be wrong though, but it fits what you are seeing. _____ From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Walter, Chris Sent: Thursday, September 15, 2005 1:13 PM To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] Re: Zone preference and failover not working Were actually using the PN Agent, it is just the PN Client that it won't work with. I tried modifying the policy and then changing it back to see if it would refresh but it didn't help. Thanks, Chris _____ From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Jeff Pitsch Sent: Thursday, September 15, 2005 12:18 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Zone preference and failover not working Are you using web interface? Zone preference and failover is only availalbe through web interface. i've also seen where policies are not refreshed in the LHC's of the servers, you may want to try refreshing/recreating the LHC's. Jeff Pitsch On 9/15/05, Walter, Chris <christopher.walter@xxxxxxx> wrote: It is only configured in the two policies and each policy is applied to different groups. Don't think it is a priority issue because both policies are not working and all of the other policies and 'Zone preference and failover' set to not configured. Thanks, Chris _____ From: Evan Mann [mailto: emann@xxxxxxxxxxxxxxxxxxxxx] Sent: Thursday, September 15, 2005 12:05 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Zone preference and failover not working You assigned the policies to the appropriate group of users and are sure your policy precedence isn't causing an issue? I set this up in MPS4.0 last week and it has worked great. _____ From: thin-bounce@xxxxxxxxxxxxx [mailto: <mailto:thin-bounce@xxxxxxxxxxxxx> thin-bounce@xxxxxxxxxxxxx] On Behalf Of Walter, Chris Sent: Thursday, September 15, 2005 12:05 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Zone preference and failover not working Hi all, Have Windows 2003 with MPS 3.0 Enterprise edition. I have a policy for one group that sets the Primary group to a specific zone and same with the backup. I have a second policy that sets it to the reverse for another group (We have two zones). The Zone preference and failover doesn't seem to be working, users are connecting to either zone randomly. I am not sharing load information between zones. Any idea's why this isn't working? Thanks, Chris