[TechAssist] Re: wondering ...Why using liquid lens in PTVs ??

  • From: "C&W Electronics" <c_w_electronics@xxxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Sun, 10 Feb 2002 11:08:23 -0600

The excess heat will also burn the phospor in the crt.
Paul W
C&W Electronics


From: Gaetan <techno1@xxxxxxxxxxxx>
Reply-To: techassist@xxxxxxxxxxxxx
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] wondering ...Why using liquid lens in PTVs ??
Date: Sat, 09 Feb 2002 22:21:38 -0500

Hi gang !
I'm reading carefully each posts on PTV liquid lenses .... and was
wondering ......Why putting liquid in those lenses ??????
Is there any other ways that manufacturers can do that ?
why not a full glass lens instead ?
Or ,. what is the reason of putting liquid in those ?
is it cheaper ? or ... because of developped heat that get into them , so
it dissipated the heat better ? (well an all glass lens may not suffer that
much from excess heat , in my opinion )
It's true that I cannot figure all the concept , cause I didn't work on any
PTV up to date .
But ... i'm listening and studying .....?

Gaetan Bourgouin
Techno Logik
Terrebonne  Que. Can.
techno1@xxxxxxxxxxxx

------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.





_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx

------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: