I agree with Jerry, disconnect the crt board from your crt, measure your screen voltage at the crt board and see if that voltage varies while adjusting the Focus control. If so then you have a bad focus screen control on the IHVT. Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "Jerry" <geiting@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 31, 2002 6:54 PM Subject: [TechAssist] Re: rca ctc203 problems > > Sounds like you may have a focus to hv leakage in the crt. Does the screen > voltage change when the crt socket is disconnected? > Jerry > Christians Electronic Service > > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of f.salemo@xxxxxxx > Sent: Thursday, January 31, 2002 4:35 PM > To: techassist > Subject: [TechAssist] rca ctc203 problems > > > > rca came in with high britness, that changes when you > adjust focus, out of focus, sent for e fact,any > information appreciated. > thank you > f.salemo@xxxxxxx > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.