Well in that case, you are probably right about the flyback being bad. Is the screen voltage very high? You should be able to adjust it down to about 200 volts or so, if not, then it's likely the fly is bad. Jerry Christians Electronic Service -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of f.salemo@xxxxxxx Sent: Friday, February 01, 2002 6:26 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: rca ctc203 problems jerry , thanks for the reply, i din't notice any big change in voltage with the crt socket off. i varied the screen voltage. i was hoping it was the fly, people will go for a fly.i thought there would be leafage in the fly.any ideas? thanks f.salemo@xxxxxxx > > Sounds like you may have a focus to hv leakage in the crt. Does the screen > voltage change when the crt socket is disconnected? > Jerry > Christians Electronic Service > > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of f.salemo@xxxxxxx > Sent: Thursday, January 31, 2002 4:35 PM > To: techassist > Subject: [TechAssist] rca ctc203 problems > > > > rca came in with high britness, that changes when you > adjust focus, out of focus, sent for e fact,any > information appreciated. > thank you > f.salemo@xxxxxxx > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.