Please do not use a syringe. You have to remove each tube, clean the tube face good, replace gaskets, and fluid. If you try to use a syringe, you will leave flakes, and you can not clean the face of the tube that way. We do the job all the time. Takes about 2 hours, and we charge $375. If you shortcut, you will have spots, and a very dissatisfied customer, not to mention the picture will not be as clear. If the customer challenges you on the repair, and takes it somewhere else, it could make your shop look very bad. Perry Bower Electric Medic "It's Cheaper to Keep Her" 3850 Washington Road Suite 5b Martinez, Georgia 30907 Phone: 706-8MEDIC4 (863-3424) Phone: 706-863-3474 Fax: 706-863-2316 Website: www.electricmedic.com mailto:info@xxxxxxxxxxxxxxxxx "WE REPAIR WITH CARE" More Info: www.augusta-ga.bbb.org/report.html?compid=6001278&national=y Factory Trained Authorized Service Center For: Fisher, GE, KEC/KTV, Konka, Mitsubishi, Panasonic, Philips Magnavox, Pioneer, ProSCAN, RCA, Samsung, Sanyo, Sharp, SONY, Technics, Zenith Provide Extended care for: AON, Circuit City, GE Contracts, Glass Agency, Philips Contracts, NEW, Rex -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Jonathan Sent: Friday, February 08, 2002 2:15 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] magnavox fluid changing Is there an easier way to replace the CRT Coolant Fluid other than removing the crt's. I heard from someone that you can use a syringe or something and vacuum the old fluid out. Does anyone know if this is possible? Thankds ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.