Hi Robert: Thank you for the information. Unsoldered Clock and Data lines and TV Powered up, with Slick Raster, I replaced the tuner(can't believe I had one, on another chassis) and the TV is working great. Thaks again for your help. Russell Hornsby Hornsby Electronics On Thu, 26 Jul 2001 18:05:05 -0500 "Robert Herring" <supertek66@xxxxxxxxxxx> writes: > > Russell, > unsolder clock and datta lines to tuner if comes on then replace > tuner. > Robert > supertek66@xxxxxxxxxxx > robert_herring@xxxxxxxx > H&H Electronics Inc > Dallas,Tx. 75233 > ----- Original Message ----- > From: "Russell Hornsby" <undertaker48@xxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, July 26, 2001 6:34 PM > Subject: [TechAssist] Zenith TV > > > > > > Hi All: > > I have a 1998 Zenith TV, 25 inch, Chassis # GA-2, Model # A25A02D, > All > > voltages seem to be ok, but will not power up, Need Part # for > Eprom, Its > > IC6001, and the numbers on the Eprom is ATMEL 818 24C04. Have no > Print > > on this one. > > Please help. > > Thank You > > Any help would be greatly appreciated. > > Russell Hornsby > > Hornsby Electronics > > > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://geocities.com/circuit_work/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://geocities.com/circuit_work/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://geocities.com/circuit_work/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.