Hi: This one does sound like it. I recall the same problem with the same model, I finally replaced the divider, and it was the cure. Note: check the CRT's too, this model was notorious for multiple CRT failure... Daniel Mission Electronics --- "v. m." <vlm@xxxxxxxxxxxxxxxxxx> wrote: > Older Zenith projection TV. Dead set when I arrived. > Revived when operated below 100v. Will operate on > 120v if screen controls are turned down some. When > any one screen control is turned up, the other 2 > goes dim, and appears to blink rapidly. Shuts down > if screen controls are turned up to normal. Could > this be bad Hi-Div (focus/voltage divider) ? > Thanks - > Mosley T.V > > ***************************************************************************** > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your Email > Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your > Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ ===== -Daniel Prairie EET Mission Electronics Kitchener,Ontario,Canada (519)576-9655 help@xxxxxxxxxxxxxxx service@xxxxxxxxxxxxxxxxxxxxxxx __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/