[TechAssist] Re: Zenith PV4677T
- From: "Shaun" <ssroark@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 27 Mar 2002 18:12:19 -0700
OK I have been looking for something to do on this set if you read the
previous post underneath this on it tell mostly everything except that I
sent the replacement to Sierra along with the original hv wire. They sent it
back to me and said sorry nothing we can do you must have a weird tv.
Shaun
Advanced Electronics
Fort Morgan, CO 80701
(970)867-3124
ssroark@xxxxxxxx
----- Original Message -----
From: "Shaun" <ssroark@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, March 01, 2002 7:47 PM
Subject: [TechAssist] Zenith PV4677T
> Hello, I have this 1990 Zenith PV4677T Big screen in the shop it had a bad
flyback 95-4146 which is located on the 9-815-04 board. I found a
replacement flyback at Andrews Electronics which is a 9-4146-02 and when I
tried to install it I found that the high voltage wire that needs to be
pussed into the flyback and then turned clockwise to lock it in place is to
small to fit in the hole of the replacement flyback. I have talked to Zenith
and Andrews and neither of them have any ideas on what to do to make it work
or modify the HV wires connector. Andrews did tell me the replacement is
manufactured by a company called SIERRA but thats all the info they had at
the time. If anybody has any ideas please let me know.
>
> Shaun
> Advanced Electronics
> Fort Morgan, CO 80701
> ssroark@xxxxxxxx
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
