[TechAssist] Re: Zenith PV4677T
- From: "Shaun" <ssroark@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 28 Feb 2002 08:31:45 -0700
Silicome will not work it needs to be pushed down farther and th 9-629-04
is in good shape and working fine. What iI need it to get ahold of SIERRA or
learn of a modification to get the HV wire to lock into the replacement
flyback.
Shaun
Advanced Electronics
Fort Morgan, CO 80701
ssroark@xxxxxxxx
----- Original Message -----
From: "George Johnson" <geojohn49@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, February 28, 2002 6:21 AM
Subject: [TechAssist] Re: Zenith PV4677T
>
> Who told you that flyback was the replacement? I
> assume you are using a 95-4126-02. That last number
> does not mean it is an later version, like the
> modules. I had made the same mistake and the pins did
> not match on a fly with only a different last digit.
> You could still try it by using silicon sealer. I also
> found that a replacement module of 9-629-04 is called
> for. They are still available for about $60.00
>
> George
> Johnson TV
> Weatherly, PA
> --- Shaun <ssroark@xxxxxxxx> wrote:
> > Hello, I have this 1990 Zenith PV4677T Big screen in
> > the shop it had a bad flyback 95-4126 which is
> > located on the 9-815-04 board. I found a replacement
> > flyback at Andrews Electronics which is a 9-4126-02
> > and when I tried to install it I found that the high
> > voltage wire that needs to be pussed into the
> > flyback and then turned clockwise to lock it in
> > place is to small to fit in the hole of the
> > replacement flyback. I have talked to Zenith and
> > Andrews and neither of them have any ideas on what
> > to do to make it work or modify the HV wires
> > connector. Andrews did tell me the replacement is
> > manufactured by a company called SIERRA but thats
> > all the info they had at the time. If anybody has
> > any ideas please let me know.
> >
> > Shaun
> > Advanced Electronics
> > Fort Morgan, CO 80701
> > ssroark@xxxxxxxx
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> >
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Greetings - Send FREE e-cards for every occasion!
> http://greetings.yahoo.com
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
