[TechAssist] Re: [TechAsssist] RCA TX826TC - Model E13323SE - Dead - FIXED
- From: gulftech@xxxxxxxx
- To: techassist@xxxxxxxxxxxxx
- Date: Mon, 16 Dec 2002 08:59:32 -0800
David,
There are some transistors that I will not sub. TP15 is one of them. It
is the highest failure item in that chassis series--TX82/825/826. A sub
may work, but for how long? Order some--185197. Just a buck each.
Ken Smith
Gulf Technical Services
3034 Gulf Breeze Parkway
Gulf Breeze, FL 32563
850-934-8324 (Voice) 850-932-0819 (Fax)
On Sun, 15 Dec 2002 23:57:08 -0500 "David Lessard" <mrfixit@xxxxxxxxxxx>
writes:
>
> Thanks. The fix was TP15. Replaced it with a NTE399 (crossed the B-E
> legs).
> Works great. Thanks for the tip.
>
> David Lessard
> mrfixit@xxxxxxxxxxx
>
> -----Original Message-----
> From: techassist-bounce@xxxxxxxxxxxxx
> [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of LeRoy Westlund
> Sent: Sunday, December 15, 2002 5:11 PM
> To: techassist@xxxxxxxxxxxxx
> Subject: [TechAssist] Re: [TechAsssist] RCA TX826TC - Model E13323SE
> -
> Dead
>
>
>
> David,
> Your barking up the wrong tree.
> RP03 is a resistor. R= Resistor, P= Pwr. supply.
> If you want to change a resistor,....jump on TP15 (use OEM part #
> 185197,
> which is a new and improved part, with different lead configeration).
> There are many more fixes for this chassis. Let us know if TP15
> doesn't fix
> it, and we will provide more help.
>
> Good luck,
> LLW
>
> LeRoy Westlund
> Westlund TV & Electronics " It's such a pretty world
> 93 North Main today !....
> Centerfield, UT 84622-0087 Look at the Sunshine. "
> Ph./Fax 435-528-3822 :-)
> mailto:LLW@xxxxxxxxxx
>
> -----Original Message-----
> From: David Lessard <mrfixit@xxxxxxxxxxx>
> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
> Date: Sunday, December 15, 2002 1:35 PM
> Subject: [TechAssist] [TechAsssist] RCA TX826TC - Model E13323SE -
> Dead
>
>
> >
> >Part number required for the following:
> >(NTE replacement if available please)
> >
> >Location: RP04
> >Markings: 3214 I know its a transistor but couldn't
> >find this number anywhere (2N,2S,etc)
> >
> >This set came in dead. No relay click when powered on.
> >Observed brown area on PCB around RP04 in low voltage
> >PS. I'm assuming this is the standby PS because I can
> >trace it up to the micro and jungle IC's. Question:
> >Is the standby PS always on or does it shut down
> >after the flyback starts up?
> >
> >Thanks techs!
> >
> >David Lessard
> >Alexandria Electronics
> >50 Harrison Street
> >Alexandria, Ontario
> >(613)525-4502
> >mrfixit@xxxxxxxxxxx
> >------------------------------------------
> >Submit A Repair Tip For Everyone Here:
> >http://www.tech-assist.org/secure/tip/main.html
> >------------------------------------------
> >To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> >To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
> >
> >
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
>
________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
