[TechAssist] Re: TOSHIBA TV CF3062A Video Problem
- From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 11 Dec 2001 21:22:45 -0500
How can the temperature rating of a cap cause any bad symptoms?
Jeff
mailto:Jeff@xxxxxxxxxxxxxxxxxx www.9-11-2001tragedy.com
FAX 1-413-280-0677
Intrepid Video & Electronics
Harrisburg, PA 17111
717-909-8844
www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
----- Original Message -----
From: "stephen senn" <stephen.lisa@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, December 10, 2001 7:19 PM
Subject: [TechAssist] Re: TOSHIBA TV CF3062A Video Problem
>
> Howdy,
>
> An update on this, I got rid of the blurry video by using the fix on
> the toshiba site by upgrading a capacitor from 85C to 105C. Then I
adjusted
> the blue drive pot down to get rid of the blue ghosting. I still have red
> ghosting, and turning the pot all the way does not totally get rid of the
> ghosting. I switched out green and red main transistors with no effect.
> Any more suggestions? Could it be the small driving transistors for the
main
> color transistors? Thanks,
>
> Stephen
> ----- Original Message -----
> From: "stephen senn" <ssenn12@xxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Monday, October 29, 2001 3:55 AM
> Subject: [TechAssist] TOSHIBA TV CF3062A Video Problem
>
>
> >
> > Howdy guys,
> >
> > I have this TV that will give a good picture some of the time, but
> will
> > get bright and start smearing the video at the bottom of the screen. It
> > just gets really blurry. Even under normal operation, it still bleeds
the
> > red fairly bad. Any suggestions? I've already reflowed the Yoke board
> > connectors and their counterparts on the Main board. Thanks in Advance.
> >
> > Stephen
> >
> >
> >
> > _________________________________________________________
> > Do You Yahoo!?
> > Get your free @yahoo.com address at http://mail.yahoo.com
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
>
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
>
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
