James. Thanks for the tip! Will this solve both problems or just the red bleed? Stephen ----- Original Message ----- From: "James M. Knoble" <jmk1938@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, October 29, 2001 3:53 AM Subject: [TechAssist] Re: TOSHIBA TV CF3062A Video Problem > > replace the RED driver transistor on the CRT board,and check the collector > resistors on all the drivers > > > > At 03:55 AM 10/29/2001 -0600, you wrote: > > >Howdy guys, > > > > I have this TV that will give a good picture some of the time, but will > >get bright and start smearing the video at the bottom of the screen. It > >just gets really blurry. Even under normal operation, it still bleeds the > >red fairly bad. Any suggestions? I've already reflowed the Yoke board > >connectors and their counterparts on the Main board. Thanks in Advance. > > > >Stephen > > > > > > > >_________________________________________________________ > >Do You Yahoo!? > >Get your free @yahoo.com address at http://mail.yahoo.com > > > >Help make your TechAssist online repair tips > >database better! Submit your fixes here: > >http://www.circuitwork.com/techassist/tip/#tips > >To unsubscribe write to: > >techassist-request@xxxxxxxxxxxxx > >with unsubscribe in the subject line. > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.