replace the RED driver transistor on the CRT board,and check the collector resistors on all the drivers At 03:55 AM 10/29/2001 -0600, you wrote: >Howdy guys, > > I have this TV that will give a good picture some of the time, but will >get bright and start smearing the video at the bottom of the screen. It >just gets really blurry. Even under normal operation, it still bleeds the >red fairly bad. Any suggestions? I've already reflowed the Yoke board >connectors and their counterparts on the Main board. Thanks in Advance. > >Stephen > > > >_________________________________________________________ >Do You Yahoo!? >Get your free @yahoo.com address at http://mail.yahoo.com > >Help make your TechAssist online repair tips >database better! Submit your fixes here: >http://www.circuitwork.com/techassist/tip/#tips >To unsubscribe write to: >techassist-request@xxxxxxxxxxxxx >with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.