If its less than 3 years old, I have had a couple of tvcrs which, among other problems, left the reel brakes on because pieces had broken off inside the cam gear. If its older than that, reel brake problems were caused by the ML Holder lever binding and not keeping the Main Lever in the position to keep the brakes released. Jerry Silverman Greentron Inc 4 Newland Ave Greenville SC 29609 864 232 3889 Fax 271 2080 mailto:greentron@xxxxxxx ----- Original Message ----- From: "David Lessard" <mr_fixit@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, March 11, 2004 3:36 PM Subject: [TechAssist] Sylvania VCR - C6240VD - Doesn't load tapes or play then shuts off > Not sure what's wrong with this VCR, its one of those throw-away models. > Tape tries to load, about halfway then VCR shuts down. With test (tape) > jig, it loads fine. It's as if the brakes are still on when loading. If > I help the guide posts along, video head spins up but then the > capstan/take-up assembly barely turns, like the brakes are on. I've > taken a good look and still can't see what's causing this problem. > Anyone had experience with this yet? > > Thanks in advance. > > David Lessard > > Alexandria Electronics > 50 Harrison Street > Alexandria, Ontario > K0C-1A0 > > mr_fixit@xxxxxxxxxxxx > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/