Than k's All Yes Bill, filaments are lit. I will look for screen control today. Perhaps I will get to use my rejuvenator. Don't have much faith though in rejuvenation as it usually doesn't last too long. BTW do you always place CRT (screen down) first for this process?? Just curious? Thanks Again Warren C Bill Grabowski wrote: > First if you have your filaments lit I would adjust your screens up a > tad. The screen control is located on the Crt board. If this pops the > raster back on then you have a weak Crt. And it will need replacement or > rejuvenation for a fix. > > Bill Grabowski > Triangle Appliance > Kenosha,Wi 53142 > > Warren C. wrote: > > Hi All > > > > I decided to start a new thread as my last efforts didn't work out. > > > > We don't have a schematic so we have been following the tips only so > > far. > > The set has had the tuner board resoldered and IC 301 replaced but to > > no avail. > > The flyback has only one control on it. Is it screen or focus?? Can't > > tell as no video. > > You can change channels as the sound does change! > > > > Does anyone have other ideas or suggestions. > > All comments welcome. > > > > TIA > > Warren Campbell > > Campbell's TV & Appliances > > Cannington Ont > > > > > > ----------------------------------------------------------------------------- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > -- > ***************************** > Bill Grabowski > Triangle Appliance > Kenosha,Wi 53142 > 262-694-6500 > 262-694-6523 fax > bgrabowski@xxxxxxxxx > ***************************** > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/