D610 is placed parallel with R632, 0.1 ohm 2wt, and R641, 1.0 ohm 2wt. All are tied to hot ground. Looks like a clamp for a current sensor to IC601. The schematic is on the T/A Members download area. Dominic DiLeo Atlantic TV Freeport, Maine ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In a message dated 4/8/2005 8:30:02 PM Eastern Daylight Time, videotech@xxxxxxxxxxxx writes: Hi Guys, can someone with a print tell me what D610`s purpose is in this Sony? reads dead short in circuit, out of circuit reads infinite one way and 167 Ohms the other way, have removed the RGB chip on the crt board, vertical output IC, HOT is not shorted, blink code is 2 blinks with everything in, (like I don`t know theres a shorted part somewhere) Thanks in advance, Larry E Larry Eastman American TV & Electronics Crystal River, Fl. 34428 ----- Original Message ----- From: "Larry E" <videotech@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, April 05, 2005 6:12 PM Subject: [TechAssist] Sony KV32FS12 BA5 won`t start, fly ticks constantly > Hi Guys, this KV32FS12, BA5 chassis, has a constant tick or click like you would have from a relay but it`s definitely coming from the flyback, B+ line is fluctuating from 35 v to 65 v up and down constantly, 200 v line is constantly changing from 108-135 volts, HOT is not shorted, pulled CN502 to remove the rgb driver from the circuit, nothing > changes, I don`t have the print so need some ideas, tia, Larry E > Larry Eastman > American TV & Electronics > Crystal River, Fl. 34428 > > -------------------------------------------------------------------------- ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/