What about the SCL and SDA voltage? Should be very close to 5vdc. It goes everywhere and that's how the "chips" communicate with each other. Won't work without it. I had a case(on the ctc195 version) where the glue that holds the smd parts on the board prior to the reflow oven, had become conductive and pulled the SCL/SDA down causing a dead set. HTH Walter --- Kenny Barnes <kennyb@xxxxxxxxxxxx> wrote: > Second request on this. Set came in dead - could > hear a slight > tic. Replaced U14101 and Q14101; also the > flyback. When you plug in to > AC, set doesn't start - no high voltage, but the > set draws .35 amps and > this current pulsates. Need some help here. > Thanks. > > Kenny Barnes > Kenny Barnes TV > 928 S. Marshall St. > Boone IA 50036 > Ph: 515 432 5250 > email: kennyb@xxxxxxxxxxxx > > > ***************************************************************************** > Classifieds! Buy or Sell! > http://sell.tech-assist.org > The Tech Address Book: > http://www.tech-assist.org/secure/tip/contact.htm > Add a Repair Tip Here, or Change/Remove your > Email Address: > http://www.tech-assist.org/secure/tip/main.htm > Lost Password: > http://www.tech-assist.org and select "Lost your > Login Info?". > Email Archives: > //www.freelists.org/archives/techassist/ ===== Walter Wood Future Tech Home Center 2786 Hwy. 43 N. Lawrenceburg Tn. 38464 931-829-3337 Fax 931-829-4044 mailto:wwood_38478@xxxxxxxxx __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/