[TechAssist] Re: RCA CTC177BE tuning problem
- From: "al m" <ampm@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 9 Jan 2002 21:15:44 -0600
dave did you check Q7404 and Q7403 these are v/u switches if i remember
correctly i had one of them shorted and had the same problem
al marquardt
ampm@xxxxxxx
----- Original Message -----
From: "Dave Huston" <DaveHuston@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, January 09, 1996 12:09 PM
Subject: [TechAssist] Re: RCA CTC177BE tuning problem
>
> Al,
> I tried it both in cable and air mode. High channels won't tune properly
in
> either mode. In checking all the tech sites, u7301 seems to be the most
> probable fix, however it's beginning to look like cost to repair may
exceed
> value. The customer may opt to use a vcr as a tuner with it since the low
> channels tune OK. I better see what he thinks before going much further.
> Dave
> ----- Original Message -----
> From: "al m" <ampm@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 09, 2002 8:15 AM
> Subject: [TechAssist] Re: RCA CTC177BE tuning problem
>
>
> >
> > this might seem dumb but make sure you're on cable setting
> > al marquardt
> > ampm@xxxxxxx
> > ----- Original Message -----
> > From: "Dave Huston" <DaveHuston@xxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, January 09, 1996 6:47 AM
> > Subject: [TechAssist] RCA CTC177BE tuning problem
> >
> >
> > >
> > > This one tunes channels 2-13 fine. UHF channels won't change. I get
the
> > same
> > > channel no matter what the OSD says. Did standard RCA tuner resolder
to
> no
> > > avail. Has anyone seen this before?
> > > Dave
> > >
> > > ------------------------------------------
> > > Help make your TechAssist database better!
> > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > > ------------------------------------------
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > Or send a BLANK email with unsubscribe in the
> > > SUBJECT field to the address above.
> > >
> > >
> > >
> >
> >
> > ------------------------------------------
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
> >
> >
>
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
>
------------------------------------------
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
